tech sectiontech section
Pro-Ject Audio is an Austrian manufacturer of components targeted to the home audio market, with a strong presence in turntables, tonearms and accessories. While the vinyl LP was largely replaced by the compact disc, it never fully disappeared from the scene and vinyl enthusiasts remain to this day. Record and turntable technology are also a large part of the urban music scene. Between the two remains a strong following for analog audio, to whom Pro-Ject Audio caters.
Denon's DN-X120 mixer is a compact two-channel DJ mixer. It includes all the basic DJ mixer features, with separate volume faders for each channel and a crossfader for mixing between the two. It also offers independent three-band equalizers for both channels that include kill switches for muting individual frequency bands.
The dual 1209 turntable was manufactured in the 1970s. It was designed to be used in both the North American and European electrical systems. With the turn of a switch, it can run on either 120 volts at 50Hz or 240 volts at 60Hz. In North America, the electrical system is 120 volts at 50 Hz and uses three wires to create each circuit. The black hot wire delivers the power, the white neutral wire is the path back to the source and the green ground wire is the back up safety system.
Adding a laptop to an existing DJ setup of a mixer and a pair of playback devices can create additional functions. You can play additional tracks from the laptop and use it as an additional playback device. You can use it to record your DJ sets for distribution or even as an outboard effects unit to create delays and loops. Connecting the laptop is simple enough, but the exact sockets used may differ slightly depending on how you plan to use the computer.
Many record players do not have built-in speakers and even ones that do can be weak or blow out when played too loud. Luckily, you can connect your record player to a guitar amplifier to boost the overall sound and quality.
A stereo system has the capacity to act like a giant conductor, creating a hum when music is played through the speakers. However, tracing the cause of that hum and eliminating it can be problematic, especially if it happens only when it's playing music on one input, such as a turntable, but does not happen on other inputs, such as a CD or DVD player.
Direct drive turntables don't use a rubber belt to spin the platter. The motor is mounted directly below the center spindle, which is connected directly to the motor's drive shaft. This greatly increases the longevity of the turntable, particularly when scratching and back-spinning. If the turntable fails to operate, there are a number of diagnostic checks you can perform yourself before taking the unit to a repair technician.
The Data Video DAC-200 is a digital-to-analog converter that can transform digital audio and video signals into analog, or analog signals into digital. This lets you move old analog recordings on cassettes and vinyl records into a digital format for storing on an MP3 player or burning to a CD. To covert the audio recordings on vinyl records, connect a turntable to the DAC-200 using the standard composite inputs on the component.
Stanton Magnetics produce a variety of turntables, primarily aimed at DJs. Their turntable units are generally direct drive, and feature straight tonearms for increased stability when scratching. Like all analog audio equipment, they can be susceptible to electromagnetic interference, or hum if unwanted internal connections are made. There are a few simple checks and troubleshooting methods that you can perform yourself before taking the turntable to a qualified technician, that may resolve the problem.
Speaker hum, or a low-frequency buzzing sound, is typically caused by loose or incorrect connection of the wires between the speakers and the amplifier or receiver. Accidentally reversing speaker wire polarity, such as crossing the positive wire to negative terminals or negative wire to positive terminals, will throw the stereo sound out of phase and may cause hum. Use the controls on your stereo to play one speaker at a time to isolate and correct the problem.
Stanton Magnetics is one of the "Big Four" turntable manufacturers in the world. Focused on providing high-end equipment for professional DJs and affordable setups for bedroom amateurs, their turntables include a variety of adjustable parameters to ensure they perform correctly whether scratching vigorously or just spinning records. If you familiarize yourself with these controls and adjustments, you'll be able to get the best from your turntables. Following the correct setup procedure is essential to safely get everything up and running.
Audiophiles and DJs still use turntables, despite the proliferation of CD's and more recently MP3-type music players. Some listeners prefer the un-compressed sound you get from vinyl. Consequently, high-end receivers have a specific input switch and set of stereo ports just for turntables. Specific ports are required because turntable cartridges don't output much voltage, unlike a CD or MP3 player, and the turntable port amplifies the voltage. RCA cables, sometimes called AV Composite cables, make the connection.
The McIntosh MA6500 is an integrated stereo amplifier with connection inputs for hooking up a variety of audio components. If you need to connect a non-amplified, signal-level device, such as a musical instrument or record turntable, you'll need to plug in a phono-stage preamplifier to boost the signal for the McIntosh amp to process. The connection takes only seconds using a standard audio cable with RCVA-type plugs on each end.
Record turntables play back sound by tracking a tiny needle, or stylus, across the grooves in a record. The undulations in the grooves are picked up as vibrations through the needle. These vibrations are then converted into an electrical signal by the cartridge that supports the stylus. The electrical signal can be heard through a pair of headphones, which convert the signal into the movement of their speakers. Or this can be done by connecting the turntable to an amplifier, which can boost the signal before sending it to a pair of loudspeakers.
A guitar amplifier can increase the livelihood and energy of your music. However, amplifiers are often costly and may rival the cost of the actual guitar unit. Making your own amplifier at home can help minimize the cost while bringing you a sound you still desire. You can make your own amplifier at home using a set of portable speakers and electrical components that can be easily found.
Ovation guitars are designed to combine the sound of acoustic guitars with the convenience of electric guitars in a live setting. Most ovation guitars have a wood front, and a curved plastic back that conforms to the body better than the traditional square joints of an acoustic, allowing for ease of motion on stage. Another feature of Ovations that sets them apart from typical acoustic guitars is their on-board preamp, which allows you to adjust volume and tone quality, and they have to be removed to change the battery. They are designed to make this process simple.
Sony's LBT-ZX991 mini Hi-Fi component system is geared towards gamers. The device includes technology Sony calls Game Sync Mixing which can be used to enhance the sound of games. Special speaker settings are available to create a party atmosphere when adjusting speaker placement to make a moving, or flashing sound effect. The Sony LBT-ZX991 can also mix sound from game devices with sound from other sources, like an MP3 player. You can also create a more powerful sound overall with effects.
A guitar amplifier can amplify sounds from sources other guitars and, with a few simple modifications, that can include using a turntable to play your records. Keyboard and bass amplifier will typically work even better because they handle a wider frequency range than most guitar amps. But, as long as you're aware of the limitations and take care to avoid blowing the speakers, the guitar amp will help you give your record collection a workout.
True audiophiles often praise the merits of the vinyl LP. Even with all the hisses and pops, there's something about the warmth of an old record that just can't be matched by a digital file. Unfortunately, records lack convenience and finding someone who actually owns a turntable is rare. Fortunately, it's relatively simple and inexpensive to convert those old vinyl LP's to digital files that can be put on a CD and played on a computer or CD player.
Yamaha home theater receivers contain a series of amplifiers for powering up to seven speakers. Modern stereo components, such as CD and DVD players, deliver a signal to the Yamaha receiver that is sufficiently powerful for the receiver to process and produce an audible sound. However, older components, such as turntables, require a signal boost to work with modern home theater receivers. The solution is a preamplifier that connects in between the Yamaha and your turntable.
If you're experiencing a low signal level when you plug a turntable into your stereo or computer, there's a simple fix for that. A record player preamp is what you need. Most stereo components like cassette and CD players are at "line" level, but turntables only have an output of a few millivolts. A phono preamp boosts the output signal up to line level. Older stereo receivers usually had a phono preamp built in, but the advent of CD's gradually eliminated the phono channel altogether. Attempting to play an LP on a modern stereo system with no preamp will result…
Many modern digital video and photography cameras are compatible with laptop computers. Connecting a camera to a laptop allows you to upload videos and images on your computer for editing, storage and sharing. Web cameras, if not already built in to the laptop, are essential for online video chatting. Connecting a camera to a laptop is a snap, as long as you have the right adapters.
For many audiophiles, the vinyl record remains the holy grail of recorded music. Despite all the pops and hisses, it's hard to beat the warmth and richness of vocal and instrumental performances on the old-fashioned LP record. It does, however, lack convenience -- you can't load a vinyl record onto your iPod or Smartphone. The trick is to convert that vinyl recording to a digital file and the first step is to connect your turntable to a computer, a simple process that requires only a few pieces of equipment.
A preamplifier boosts the audio signal from stereo components such as a turntable so the equipment can be player back on an amplifier or receiver connected to speakers. Turntables and other line-level audio components do not provide sufficient power to create adequate volume for listening. The preamplifier solves this problem using a standard set of RCA-type stereo cables with 1/4-inch plugs on each end. Disconnecting the preamplifier from your system takes only a few minutes. No tools are required.
While MP3 and CD formats dominate the current audio marketplace, vinyl records remain popular among collectors. Many claim that vinyl sounds better than digital formats, while others simply own records that they still enjoy. Many of today's lower priced stereo receivers are not adequately equipped to power a turntable. To add a turntable to such an audio system, a user must use a specially-designed phonograph preamp also known as a phono stage.
The Mackie 1402 VLZ is a sophisticated and full-featured audio mixer capable of taking most any signal through any connector and turning it into usable audio in either a live or studio setting. All of the many connectors and inputs/outputs can be confusing at first, so connecting your turntable to this mixer may prove difficult. However, it is possible to do so as long as you have a phono preamp with which to convert the audio signal from the turntable to one usable by the mixer.
Phono inputs are used to connect phonographs or turntables to an amplifier or receiver. While some radios and receivers will have phono inputs built in, some models may not. If you'd like to add a phono input to your radio or receiver, you'll first need to check whether your radio has a set of audio inputs, such as you would use to connect a CD player or other device. If you do, it's a simple matter to add a set of phono inputs.
At the most basic level, an amplifier is simply a device that will make you and your instrument louder. The device works by combining multiple stages of amplification in order to produce the end result -- sound out of a loudspeaker.
Modern audio-video receivers typically need a phono preamplifier to boost the signal from a turntable, which produces a low-power audio output. The phono preamp boosts the signal from your record player to a level that can be processed and amplified on your main stereo amp or receiver, which then plays the sound on a set of speakers. The preamp connects between the turntable and your amp or receiver. As with many types of electronic components, a burn-in period for a new preamp can help it operate at peak efficiency, improving the mid-range and treble frequencies in particular.
Most modern amplifiers and audio-video receivers require a phono preamp to boost the signal from line-level audio equipment such as record turntables. The turntable itself sends a stereo signal at line level, meaning it is not an amplified signal. A phono preamp is needed to get the signal up to a level that it can be processed for playback through an amp or receiver. If you've hooked up your preamp and cannot get stereo sound, try troubleshooting the connections.
A preamp boosts and adjusts the sound quality of the audio signal from a stereo component or musical instrument, such as an electric guitar, on the way to an amplifier that reproduces the sound through connected speakers. Since the control knobs on almost all electronic components, including preamps, slide over a metal post, there is a risk of the volume control knob coming off and getting lost. This is especially true for musicians who regularly set up and break down their gear at gigs. Replacement volume control knobs are available and install in seconds.
The Yamaha RX-V365 receiver will amplify all the audio and video signals you feed into it. If you want to connect your CD player to it, you connect it with phono RCA cables, as you would to a stereo amplifier. Connecting your CD player to the device will not take long.
If you are building your home cinema system or HiFi, then you will need to be able to connect a CD player to your amplifier or receiver. This is a universal process shared by all amplifiers and receivers. You will need a stereo audio RCA cable to connect the two devices together. This will most likely be supplied with your CD player when you purchase it. Once connected, you can press the "CD" button on your Yamaha receiver to switch to the CD player.
Since most turntables are equipped with RCA audio line out jacks, and all AV receivers are equipped with RCA audio line in jacks, connecting a turntable to an AV receiver is not at all complicated to do. Don't let all of the jacks, ports, and knobs that you see on the back of your AV receiver throw you. You don't have to be an engineer to figure this out. You basically just have to insert two plugs; however, first you need to know where they go.
Like most modern receivers, Pioneer receivers -- from the budget VSX line to the upscale Elites -- have clearly marked red and white RCA female connections for turntables ("phono") on the back panel. If your turntable does not have a preamp, however, you may find that directly connecting the turntable to the Pioneer receiver, switching the inputs on the front panel or with the remote, and turning up the volume results in little, if any, sound. If this is the case, you'll need to purchase a phono preamp.
Unlike iPods and other digital devices, the phonograph does not operate in isolation. Its output depends upon a pre-amp or stereo receiver to produce sound. Even when both pieces of equipment function properly in isolation, distortions in sound quality such as humming may result from grounding issues. Fortunately, these problems usually require only a little experimentation to resolve.
Depending on your taste, you may prefer digital audio over analog. However, if you are more of the analog type, you are probably going to want to have a record player set up properly in order to play all of your vinyl records. Setting up a record player is a simple task and requires only a few easy-to-follow steps. Doing so will help enhance your record-listening experience, and it can look a little more classy than your average CD player.
Turntables used to be the dominant method of playing audio during the vinyl era. They have since been replaced by CD players which read the digital formats of CDs and transfer the audio to a speaker or receivers. Hooking up a turntable to a modern Yamaha receiver requires a middleman electrical device known as a preamplifier to boost the turntable's signal to a level that the receiver can use to transmit to the speakers.
The MPC 1000 sampling production station allows you to record audio from outside sources into the sampler's built-in memory card, then upload the audio to a connected computer. It is possible to hook up just about any audio device, including a record-playing turntable. The MPC 1000 only requires two cable connections, so it takes only minutes to hook the two devices together.
A phono preamplifier (preamp) connects to a turntable to boost the audio signal from a record so it can be processed on newer audio-video receivers for playback. New AV receivers may not have a dedicated set of turntable jacks. Instead, AV receivers accept the line-level signal from CD players and amplifiers, which does not require equalization or a significant power boost. Turntables need extra amplification, which is why a preamp is needed to work with receivers that do not have a dedicated set of turntable jacks. Standard stereo cables are needed for the connection.
If you love the sound of vinyl or just don't want to give up on your old record collection, you need a turntable. Not all modern receivers are designed to connect to a turntable, however. If your receiver is one of these, you can remedy the situation.
DJs sometimes use laptops to create and play digital playlists. In addition, some DJs may utilize digital turntables that allow them to "scratch" music digitally without using vinyl records. The setup allows audio from the laptop to be directed through the turntable's sound card and manipulated before going out through the mixing board and speakers.
If you have a stack of old records and you want to convert the records into music on your computer, you must connect the turntable to your computer. Doing so also allows you to play the audio of the records through the speaker systems of the computer. You do not need any expensive equipment, and you only need one cable to connect the turntable to the computer.
Copying LP records into the digital domain gives new life to old vinyl. The analog signal can be converted to a digital file suitable for playing on an MP3 or iPod, or burned to a compact disc for music portability that a record could never offer. Getting the grooves off the record and into a digital format requires a turntable connected to a computer. Some new turntables are equipped with a USB cable that attaches directly to a free USB port on a computer. Older turntables with RCA-type audio plugs require extra hardware to transfer the audio signal to the…
Many audio aficionados prefer the sound of tube amplifiers to that produced by solid-state amplifiers or receivers. The argument is that the tubes produce a warmer, cleaner sound than you can get with transistors or integrated circuits. It's an open question, and one that's prone to debate. But what is for certain is that the combination of a tube amplifier and a turntable does hold a certain retro appeal that many enthusiasts like to sample.
For many audiophiles, pairing a tube preamplifier with a solid state amplifier is magic, giving the listener the warm midrange quality of tubes with the extended bass and control of a solid state amp. Just using tubes in the preamp makes tube replacement cheaper and eliminates the need to bias. Tube preamps don't run particularly hot. Using a solid state amp results in far less heat output than a tube amp, and eliminates the need to bias new tubes in the amp circuit.
Integrated amplifiers combine the source switching and volume control functions of a control amp/preamp and the output of a power amplifier in one chassis. Integrated amps can be designed to very exacting specs, and offer a way to get excellent sound without breaking the bank by having to buy two separate components. Hooking up an integrated amplifier is relatively easy to do.
There is more to being a DJ than simply playing songs. A good DJ must be able to mix--to combine two or more tracks, either to smooth the transitions between them or to create an entirely new, unique sound. A mixer allows you to play two tracks simultaneously through a single sound system, or to smoothly fade between them. The most basic mixer is the 2-channel mixer.
Turntables have made a big comeback. Many models are available for home listening. If you have a collection of vinyl records you're dying to hear, setting your stereo up with a turntable is a breeze.
Playing vinyl records isn't as easy as it was back in the day. For those with vintage vinyl collections a turntable, a phono pre-amplifer and a receiver are required to fill a room with the sounds of record albums. Because modern electronic technology is different from the technology used to create vinyl records, a phono pre-amplifer is required to enjoy them.
A pre-amplifier, or preamp, takes electrical current from a transducer and increases its voltage gain to a higher level. A transducer could be an audio device such as a microphone, a guitar pickup or a stereo turntable. These most common forms of preamps are used in home audio systems and live music performances to enhance the listening experience.
