tech sectiontech section
RCA cables are commonly used to carry video and audio signals between devices such as home stereo equipment, DVD players and video gaming systems. Easily recognized by the red, yellow and white jacks, these cables are also called composite connectors. Over time and with use, the plugs can develop a layer of oxidation over the metal contacts, reducing the quality of video or audio transfer. You can clean the RCA plugs using electrical contact cleaner, available at electrical supply stores, hardware stores and online.
Over time dust and dirt can clog the audio jacks on your expensive equipment. Since most audio jacks are small it may seem impossible to clean them properly but it can be accomplished. Even the dirtiest jacks can be cleaned in minutes so that you can connect your speakers or headphones and once again enjoy clear sound.
Oxidation is a possibility on all base metals. RCA connectors often use gold or platinum to mitigate the possibility of this from occurring under normal usage. However, even premium cables made of precious metals that are prone to tarnishing can suffer from this. Prevention and treatment of these types of RCA connectors is possible and recommended to prevent oxidation from hampering the highest level of performance possible when using RCA audio cables.
Small contaminants in optical cables can increase the odds of a drop in signal. These annoyances can be mitigated or removed by proper cleaning and maintenance of fiber-optic lenses. Removing large and small particles make a big difference when it comes to reduction of jitter and possible physical scratching of the small, delicate optical lenses. Simple materials are all that is required to ensure that your optical cables are their cleanest.
Regular cleaning is essential to achieving optimal performance and longevity from nearly all electronic equipment. Dust, oxide and other contaminants build up on electrical components and can interfere with the equipment's functionality or even cause premature failure. Routinely cleaning your electronic equipment can help prevent damage and keep it running smoothly for years to come.
All metal audio contacts become dirty and mildly oxidized over time. Even gold-plated connections can and will develop a haze, reducing connection quality. The old over-simplified recommendation to cleaning contacts was to insert and remove the connector repeatedly, thereby removing any contaminants. This method, however, places undue stress on the connectors on the electronics themselves. Using proper cleaning materials will rejuvenate the connection quality, reducing electrical resistance, and making the connection as good as new.
Pro Audio Gear is a high-end supplier of professional DJ supplies. These components are complex, expensive and specialized. The gear requires regular maintenance and care to ensure that you get the most use out it. Fortunately, the cleaning procedure for audio equipment is not complex. It requires nothing more than time and readily available household products. Get all of your equipment ready and get ready to clean all of those dusty speakers, microphones and other gadgets.
Cleaning the jacks on musical equipment can prolong the life of the equipment as well as prevent the loss of sound quality from gummy connections. There are a couple of simple tools that clean quickly and effectively; the only thing that makes this a potentially tricky task is that you have to be careful not to get drops of water in the jack. It's also important to let the equipment dry completely before plugging it in and turning it on. Any water can short circuits and destroy your equipment, and if it's already an antique you should be especially careful.
Hissing, static, crackling---all are sounds you hear from dirty audio connectors. Dust and dirt not only collects on the case of your audio receiver, but also on the audio cables, the connectors attached to the cables and the ports that the audio cables are plug into. To keep dust and dirt to a minimum, you should clean your audio equipment and connectors regularly.
Removing smoke odor from electronics requires time for fresh air to circulate around the equipment so the smell can dissipate. Electronic components and the cabinets housing them can absorb smoke, especially from cigarettes and other tobacco products, which are common causes of household smoke odor. Because electronics are delicate and easily damaged by liquids, conventional techniques involving liquid cleansers can not be used for risk of ruining the equipment's internal components. The safest way to get rid of the smoke smell is to air out the electronics and clean the cabinets separately.
While the attitude of many people regarding their audio equipment is to plug it in and forget it, taking a little bit of care and adopting a regular routine to clean your equipment will keep it looking better, and, more importantly, keep it working better, longer. No special tools are needed for cleaning your gear, just the willingness to take a few minutes on a regular basis to protect your investment.
Like all electronics, audio equipment must be kept clean to keep it in top working order. It can be expensive to have a professional clean it, and it can take several days or more to get the equipment back after sending it out to be cleaned. For those who are pretty handy, it is not an overly difficult task to clean audio equipment and save the time and expense of using a professional.
Hearing a scratchy noise while you turn up the volume of your vintage audio system? The problem is most likely caused a dirty potentiometer. A dirty potentiometer can cause problems in volume, tone, and any other number of knobs on a piece of stetero eguipment. But fear not, there is usually a quick and easy way to remedy this problem.
The life of a pro audio power amp can be prolonged extensively with periodic cleaning. Units with fans are particularly vulnerable to collecting dirt and grime internally, especially if the pro audio power amp is used around cigarette smoke. Cleaning the jacks in a pro audio power amp will also reduce popping and cut outs. Read on to learn how to clean a pro audio power amp.
