home sectionhome sectionRoofing installation is a process of layering. This process is compounded when cedar shakes are used to cover the surface. A three-ply cedar shake roof combines the traditional layers of wood, flashing and felt with three complete layers of cedar shakes. These multiple layers take a bit more time to install, but once in place they will provide superior, long-lasting protection to the building while giving it a whole new look.
Cedar roofing provides a natural and traditional look for residences and lasts for many years. Cedar shakes and shingles start out with a warm, golden color that gradually weathers to a light gray tone. Cedar roofs require proper installation to provide adequate protection for the roofing materials themselves and the structures that they cover.
Cedar roofs are different from other wooden roofs only in the amount of attention they require. If you have a cedar roof and leave it unsealed, it will often form moss and rot, which may greatly reduce its lifespan. Cedar roofs that are left uninsulated will leak cold air like any other. Insulation must be installed against the underside of your cedar roof, with enough space between the two to allow the natural wood surface to breathe. A proper insulation job can make the difference between an energy wasting and an energy efficient cedar roof.
Whether in a fence, siding or roof, cedar wood responds very well to pressure washing as a way to strip away minor damage. Nicks, scratches, dings and weathering in cedar wood can all be stripped away with nothing more than a pressurized jet of water, leaving you with a fresh wood surface that's ready to be refinished.
Cedar shake has been used as a roof covering material for centuries. Good quality cedar shake, or shingles, can last for 30 years or more. They have the advantage of being an all-natural insect-repellent substance. Cedar shake comes in a variety of thicknesses, lengths, grades and levels of fire resistance. Cedar shake roofing or siding may need occasional maintenance to keep it looking good, but unless you are a trained roofer you should not walk on a cedar shake roof.
Cedar shakes can be a lovely, rustic-looking roofing material. They are also eco-friendly. However, there are some misconceptions about their durability and strength. The weight of snow or people walking on a roof is born by the plywood underneath the shingles and by the frame of the house. The shingles are a barrier between that wood surface and the outside.
Many types of roofing, including roll roofing and asphalt shingles, should never be placed over the top of wood shingles, such as cedar shakes. If you must reroof directly over cedar shake shingles, you should do so only with new wood shakes, though reroofing over old shakes still isn’t advisable. If you would like to put a new roof onto a roof that already has cedar shake shingles installed, you should take off the old shakes first.
Cedar is a sustainable roof material that offers several advantages for home construction. Cedar roofing is strong, has good insulation capability and resists moisture, decay and insect damage. Red or yellow cedar makes an attractive roof material with a natural appearance and will last for years. Several cedar roofing treatments are recommended to help preserve the appearance and integrity of this wood roofing material.
Moss crops up on cedar shake roofs in cool, moist areas. These conditions can be climatic, or created by heavily shaded areas that don't dry out properly after a heavy rain. Moss itself is not necessarily problematic. But, a covering of moss keeps wood shingles wetter longer, which promotes the growth of wood destroying organisms. Therefore, it is best to remove moss quickly. Replacing even parts of a cedar shake roof can be expensive.
Cedar roof shingles and shakes create a warm, rustic look that adds charm to any home. However, while their appearance is one of their strongest selling points, their durability is not. Compared to other roofing materials, such as slate, metal or tile, cedar shingles have a fairly short lifespan. You can encounter several problems with a cedar roof over the years.
The thick, overlapping shingles known as shake roofing give homes a rustic exterior look. Wood remains the most common material for making shake roofing shingles, but other materials offer different benefits. A number of problems also exist with this type of roofing that you must consider before installing it on your home.
With an appearance that can be both natural and refined, cedar shakes are a popular choice for siding and roofing. Cedar shakes are more expensive than aluminum or plastic sidings, but they have an elegance that's hard to match. One of the most important decisions you have to make before finishing your house with cedar shakes is whether to paint or stain the cedar. There are advantages and disadvantages to painted shakes, not to mention the dramatic difference in your house's appearance.
Wood shingles and shakes are usually constructed of western red cedar or Thuja plicata. This type of wood is impenetrable to fluids, has a straight grain, low weight or density, is generally free of defects and lends itself well to outdoor use. Although red cedar is durable, care and maintenance is still recommended to keep the roof looking good.
Cedar shake siding may serve as a hallmark of certain historic architectural styles, which can be an inspiration for new construction or remodeling. Cedar shakes on a home will give it a rustic appearance, evoke beachside cottages or lend whimsy to architectural elements such as those found on Queen Anne structures. The texture and appeal of the wood is matched by its technical features such as longevity and resistance to bugs and rot. The most typical style of shake siding is square shakes applied in straight rows, but there are several techniques and forms that make a house stand out.
Cedar shingles have been used as a roofing material for hundreds of years. One reason for this is that cedar wood contains natural preservatives that keep the wood slightly pliable and water-resistant for many years. However, what many homeowners seem to think is that once it's installed, their cedar roof needs no maintenance, and unfortunately this simply isn't true. Sunlight and rain bleach and wash out the natural preservatives in the wood, and water enters the cells of the wood and causes it to swell, then dry and shrink. Cracks develop. Mold and fungus begin to grow. In short, your…
Shake roofing is popular on many homes because of the natural wood look. Shakes have a rustic appearance and are made of wood, with the durability of shingles. Installing shakes is similar to installing regular asphalt shingles. Shakes are available in a variety of shapes and styles to fit any homeowners needs. They also have warranties that can last up to 50 years.
Nailite Hand-Split Shakes are vinyl siding panels that are designed to look like hand-split cedar shakes. The siding comes in a wide variety of colors so that you can achieve the appearance you desire. They can be installed over the exterior sheathing on your home. The siding is installed by nailing it to the sheathing along the top nailing strip. The sides slide together and lock to create a seamless siding. You will be able to achieve the rustic appearance of cedar shake siding without the cost and maintenance.
Cedar is a lightly scented conifer noted for its strong and durable wood. One particular use of cedar is for making shakes, or shingles for roofing and siding houses. With exposure to the elements, the natural hue of cedar becomes discolored and darkens. A simple process of treating and cleaning can lighten your cedar shakes and return them to their original glory. By regularly performing shake cleaning, you can keep the darkening at bay.
Cutting cedar shakes requires the use of a cedar-shake axe, called a froe. A froe consists of a handle and an elongated flat-metal-blade; it resembles an axe head, but works in a different way. The elongated, non-tapered head of a froe does not allow it to split cedar with direct force.
Cedar shake roofs add character and style to a home, but the wood roof needs an annual check up to ensure that no damage has developed. In addition, cleaning is required every year to keep mold and moss from building up, and you should seal the roof every few years to protect the shakes.
Installing a new roof on your home or building is a costly endeavor but in the long run will save you from more expensive damage caused by leaks. The material for the new roof is ideally one that will not need replacing for many years. Cedar shingles typically provide good weather protection for between 15 and 40 years depending on the climate. A second benefit is the rustic look they impart to your house blending with its natural surroundings.
Working in the construction industry today can be dangerous. Compliance with safety practices and good housekeeping rules are mandatory in the business. Using available resources, such as standard roof jacks, can help minimize and reduce the number of accidents associated with falling hazards of equipment and workers. Using safety harnesses, wearing rubber soled shoes for better traction, keeping the roof free of debris and tripping hazards and avoiding work on a roof in inclement weather will also help reduce the number of roofing accidents.
Wooden roofs add an element of rustic beauty to a home or residence, but when the roof springs a leak, that rustic beauty can turn into a headache for the home or property owner. If the problem is not addressed right away, the situation will worsen and make the leak bigger, which will in turn damage contents of the home. Luckily for the savvy do-it-yourselfer, repairing such a leak is a quick fix that can remedy the problem.
Shake roofing is among the oldest roof coverings and can give your home a rustic look. Shakes are typically constructed of red cedar, which is resistant to shrinkage, expansion and decaying. Shake roofing installation requires an ice dam such as aluminum flashing along the eave, asphalt-saturated felt paper and a starter course of cut-to--fit shakes. Once the starter course is laid, the first course is installed directly over it. Each course follows in the same manner with the exception of staggered corners.
In order for your home to have necessary protection from the elements, such as wind and rain, you should replace the roof of your home as often as recommended for the type of material you have used, such as asphalt shingles or wood shakes. Often though, the structure of your roof may have years of life left in it, but the roof will begin to look old and worn. In these instances, you do not need a new roof. Instead your roof needs a thorough cleaning.
Hand-split shakes have been used as roof and exterior wall covering for centuries. Making shakes is a simple procedure and requires few tools. One or two hours of practice should be enough to allow most anyone to become a proficient shake maker. The critical portion of making shakes, choosing wood billets, involves a certain degree of luck. Good shakes are made with straight-grain, knot-free wood. It can be difficult to discern the properties just by looking at the outside of a tree, but the search will be worth it.
Cedar posts are mainly used when working with cedar fences. They are similar to pressure-treated posts in size and offer a more natural look to any fence. Cutting cedar posts is sometimes necessary to fit them at the ends of a fence. Cedar fence posts split just like any other type of wood. There are a few ways to go about cutting them, but the easiest method is with a chainsaw. When the proper precautions are taken, cutting cedar posts with a chainsaw can be accomplished in no time.
Cedar shakes are used on the side of homes to create an attractive style. These flat wood shingles can last for years if well maintained with sealant to prevent damage from moisture and sun. If you have a home that needs new shakes put in place on a wall, to replace a section that has rotted or beyond repair, you will find the process is fairly straight forward. Remove the old material and get ready to start from scratch.
Cedar shingles can give a home a rustic look while providing ample protection from the weather. Wood is a good insulator and makes wooden shingles an attractive roofing option. The downside of cedar shingles is when one becomes damaged or cracked. Small pin holes or nail holes in a cedar shingle can be repaired with wood putty, but a damaged or cracked shingle must be replaced. The most difficult part of the project is removing an old shingle without damaging surrounding shingles.
Cedar has been a favorite roofing material for hundreds of years because of its natural beauty and durability. The oils that make cedar wood naturally weather and decay resistant, however, can break down over time, negating all the positive aspects of the material. But when this aging of the wood is caught early, cedar shakes can be treated in a variety of ways that can easily restore their original quality -- another advantage of this classic material.
Cedar shake are shingles crafted out of cedar that you can install onto your roof to get a wood-like appearance. Like other shingles, after years of use, cedar shakes can collect dirt, and the roof that they cover will begin to look dirty. You can keep a cedar shake roof looking its best by cleaning the shakes occasionally. Most homeowners can handle typical cleaning methods for a cedar shake roof on their own, but if the roof is really dirty, a professional may be able to help.
Although cedar shakes are a beautiful addition to any home, they do have their problems. In some locales their use is actually restricted. That doesn't have to mean settling for a jazzed-up version of the venerable asphalt shingle, however. For the cedar shake look without the cedar, there are alternatives on the market that mimic the natural beauty of wood while addressing its shortcomings. Basically, the selection boils down to metal, clay, concrete or recycled materials, each with its own advantages.
Hand-split cedar shakes (shingles) are used in roofing construction because of their pleasant appearance and easier installation, as compared to slate, concrete or metal. They are also easy to fix, remove and replace, and if properly maintained, can last for 50 to 60 years.
Cedar-shake roofs are attractive and have about twice as much insulating power as standard asphalt shingles. They are more resistant to wind and hail but they do require regular cleaning and maintenance for maximum life. Debris should be removed because shake roofs need a maximum amount of air to stay dry. Overhanging branches should be trimmed so they don't rub or inhibit evaporation. Chemical preservatives applied to shakes after cleaning add years of life to a cedar roof.
Normally made from western red cedar, wood shakes provide a rustic look to a roof along with insulation for the attic. Thinner and smoother than shakes, wood shingles, while not as rustic as shakes, come in fancy shapes and sizes. Problems exist for both shakes and shingles involving fire protection and resistance to fungus.
Cedar shakes -- also called "shingles" -- can be used for roofing or in place of vinyl siding on a home. Just like any natural material, cedar can come in a variety of shades and colors. While most cedar has a reddish tint, the precise tone can vary greatly from one piece to another, giving the creative do-it-yourselfer an opportunity to incorporate patterns and designs into their project.
Cedar shakes, made out of high-quality red or white cedar, tend to split over time from the elements. They can also crack when you walk on them, so use caution when repairing. Because of fire hazards, some areas do not allow wood shakes, so check your area's local codes before replacing an entire roof.
Cedar shakes are long, thin pieces of cedar wood attached to the exterior of homes and buildings. Cedar shakes are installed in an overlapping pattern on roofs or on the sides of buildings. While most builders purchase cedar shakes pre-cut, you can cut them yourself from felled cedar trees. The process of cutting cedar shakes from a cedar block is called splitting; it requires the use of a specialized tool called a froe.
Moss growing on a cedar shake roof can be very dangerous to your family's health and safety. When it rains, the moss traps moisture and prevents the cedar shake roof from drying properly and completely. Over time this can cause leaks in the roof, damaging its integrity. During the winter months it is possible for the moisture that has accumulated in the roof to freeze, causing additional damage.
Cedar shakes are a hugely popular building material used both on rooftops and for siding. While a cedar shake is often confused with a shingle, the shake differs in that the product has greater variation in length, width, and thickness than the more uniform shingle. This variation is what gives cedar shake siding and rooftops their unique, hand-made appearance.
Cedar shakes are a popular building material that give siding a rustic, natural look. Traditionally cedar shakes were hand split, and as a result each shingle was unique in size and thickness. Today cedar shakes are mostly manufactured by machine, but variation is programmed in to create the illusion of a hand-crafted shake shingle. Treating cedar shakes is important to maintain the color and preserve the integrity of the cedar wood. Penetrating oil-based wood stain is recommended for treating shakes. The shakes should be washed and brightened prior to stain application.
People have used hand-split cedar shakes to roof and side their houses for hundreds of years. Back in the old times, however, you didn't have the option of going down to the local hardware store to pick up your roofing material. Cedar shakes were split from blocks of cedar wood using a simple tool called a froe. A froe is a blade that is attached at a 90-degree angle to a wooden handle. First the froe is driven into the block of cedar wood, then a twist of the handle pops the cedar shake free from the block.
Traditional, handcrafted cedar shakes have been used on roofs and siding for hundreds of years. The shakes are made by using a simple tool called a froe. The froe is knocked into a block of cedar with a wood mallet and then, with a few twists on the handle, the shake is split from the block. Making your own cedar shakes involves honing a series of cedar blocks from rounds, as well as procuring and using the froe and mallet.
Cedar shakes are a traditional building material that have been used for centuries. Exposure to the elements can lead to cracking or splitting of shingles. One of the nice features of cedar shakes is that individual shingles can be repaired, or if the damage is extreme, replaced. Repairing a split cedar shingle involves lodging a corrosion-resistant piece of metal underneath the shingle in order to restore the water resistance. A badly split shingle can be extracted and a new replacement shingle inserted and nailed into place.
Cedar shakes are a traditional siding material that have been used in parts of the eastern United States for hundreds of years. Cedar shakes are laid in rows, or courses, of shingles. The layering of shingles allows the siding to shed water and prevent the underlying structure of the house from being damaged. Cedar shakes are applied to the house in courses, starting at the foundation and working up. Properly installed and maintained cedar shakes will protect you house for decades, and in some cases, even centuries.
Cedar shakes are a traditional siding material that have been used for hundreds of years in parts of the Eastern United States. Properly maintained, cedar shake siding can last for decades, but exposure to harsh weather can eventually cause your cedar shakes to split or deteriorate. With the right tools, individual cedar shakes can be either repaired, or removed and replaced. Repairing a split cedar shake involves sliding a protective piece of non-corrosive metal underneath the shingle in order to restore the moisture barrier. Replacing a badly damaged shake involves first prying up and pulling out the old shake before…
Cedar shakes are a traditional siding material that has been used for hundreds of years in parts of the Eastern United States. Properly preserved and maintained, cedar shakes should last for decades. However, harsh weather conditions, lack of maintenance, or inferior material quality can lead to damaged cedar shakes and compromised protection for your house. Badly deteriorated shakes need to be removed. Then the underlying surface will need to be prepared before re-siding with new cedar shingles.
Cedar shakes are a traditional siding and roofing material that has been used for hundreds of years in the United States. Cedar shakes are durable, but occasionally individual shingles can be damaged. There are a several different methods for repairing damaged shingles. In some instances, a metal shim can be placed under the damaged shingle in order to retain a sealed surface. In other cases, you may find it necessary to remove the damaged shingle and replace it with a new one.
Cedar shake is a traditional building material that has been used on roofs for hundreds of years in parts of the eastern United States. Cedar is a durable wood that can hold up well even if left untreated. However, adding a penetrating, oil-based preservative to your cedar shake roof will prevent damage from the sun's ultra-violet (UV) rays, help it to shed moisture, and allow the wood to maintain its natural wood tone.
Cedar shakes are a traditional building material that has been used in parts of the Eastern United States for hundreds of years. This rustic looking material is applied to the exterior of the house in overlapping rows, or courses. The layered shakes shed water and protect the underlying structure of the house from exposure to the elements.
Cedar shake is a traditional siding material that has been used for centuries in parts of the Eastern United States. Cedar shake is installed by overlapping rows, or courses of shingles. By starting at the base and working your way up, you will completely cover the house in layers of cedar shingles. Properly installed cedar shake will resist water and prevent damage to the underlying structure of your house.
Cedar shake siding is a durable, attractive building material that can give your house a classic, rustic appearance. Proper installation of cedar shake requires patience and a bit of knowledge. By carefully following a few simple steps you can protect your house from the elements, and give it eye-catching curb appeal.
Red cedar shake is a classic siding material that can give your house a rustic, natural look. As with any natural wood, your red cedar shakes will need to be protected to give them longevity and to keep them looking sharp. To do this, simply apply a good-quality, protective stain.
Cedar shakes are thin sheets of cedar that vary in size--12 inches long and 6 to 8 inches wide. Used for house siding, the shakes can provide years of protection to your home, while making your home one of the most beautiful on the block. While cedar shakes are usually made by manufacturing companies, you can make your own and save money. The average do-it-yourself homeowner can make his own cedar shakes with little or no experience.
Cedar wood is ideal for many outdoor projects because it contains natural oils that protect against insect infestation and rot. Along with this natural resistance, cedar is very durable. Even though cedar is a softwood, it is 80-percent as strong as oak, a notable hardwood. However, despite its natural benefits, cedar shakes used for roofing can eventually succumb to mold and mildew damage as the wood repeatedly comes in contact with rain and snow. Luckily, there are methods available for waterproofing cedar shakes, further extending the life and durability of your cedar roof.
Cedar shakes are shingles made of the tough cedar wood. Some of these shingles remain for hundreds of years, as they contain oils that make them naturally resistant to decay. Cedar shakes can be painted or sealed to protect them from excessive weathering. Whichever option you choose, yearly maintenance is necessary to preserve the wood. Knowledge of how to care for cedar shakes will prolong the life of the shingles and keep them looking fresh.
Removing paint from cedar lumber works much the same as removing it from regular wood. There are three primary methods that are used; sanding, chemical stripping, or applying heat and scraping the paint off. Each of the three methods will be discussed below.
MiraVista shake is a type of roofing material that is made by Owens Corning to resemble other types of roofing material. It is used by builders to provide stability to a roof while still offering a pleasant appearance.
Cedar shakes, whether in the form of siding or roofing, make a beautiful addition to any home. Not only does it look attractive, cedar has a natural durability, standing up to wind, rain, cold and the sun--even after years of weathering. Cedar also acts as a natural insulator, which can help on energy costs, according to the Western Red Cedar Lumber Association. With proper annual maintenance, cedar shakes will last a long, long time, both on the roof and as a siding.
Cedar shakes were a common roofing material long ago before the invention of brightly colored fitted tin roofs and rolled roofing. The shakes were hand-split by country craftsmen who were masters at their trade. Cedar was used as a rugged, weatherproof covering on most country homes and had the added bonus of being insect proof. For this reason, sometimes cedar shakes were used on the exterior walls of homes. The longer the cedar shakes were exposed to the cruel elements, the more attractive in appearance they grew, taking on a gray, weathered appearance, giving the building a certain strength of…
White cedar shakes make a home beautifully stand out. Like a good wine, the color and the look of the shakes improve with time. White cedar doesn't shrink or crack as much as many other types of siding. Many people feel that vinyl siding is easier to install, but the advantages of cedar shakes are not only in appearance, but also in insulation value. Cedar shakes are inexpensive and they last for decades.
A cedar shake roof is much nicer looking than asphalt shingles and gives a natural appearance to any roof. The roof of cedar shakes lasts longer than a shingle roof. Shingles usually last from 15 to 25 years. Cedar shakes can last up to 50 years. Be aware of the difference between cedar shingles and cedar shakes. The cedar shingle is thinner than the shake and has a smooth surface. Shakes are thicker, sawn or hand split and have a more rugged appearance. In the past, cedar shakes were used more than shingles because of they were cheaper. Today, shakes…
