Discover the expert in you.
Discover the expert in you.
Knit an infinity scarf to challenge your skills when it comes to knitting in the round. Infinity scarves are also called Moebius scarves, because they're one continuous circle with a twist in the middle. After you make the twist in the first round, you knit an infinity scarf the same way you would any other tube on circular needles. While it may seem that a simple twist in the circular cable would do it, the twist is in the stitches.
The Gauley River pumps with 25 miles of heart-pounding rapids and is home to six weeks of river-rafting fun each autumn, known as the Gauley Fest. Rafters come from around the globe to experience the pounding hydraulics of the Upper Gauley River, with its dangerous, expert-only rapids. If your skill level or heart isn't quite ready for rapids rated Class 5 on the International Scale of River Difficulty, you can take it down a notch to the challenging Class 4 action found on the lower portion of the river.
Pull-ups, rows and biceps all focus on gaining muscle for the ectomorph body type. Do pull-ups, rows and biceps for ectomorphs with help from an experienced fitness professional in this free video clip.
Upright rows for the side deltoids can be done using a resistance band in just the right way. Do upright rows for the side deltoids with help from a qualified fitness professional in this free video clip.
A barbell row is a compound free-weight strength-training exercise that requires contribution from muscles throughout your entire body. It’s more appropriate for advanced lifters, as it requires coordination and balance to perform. The barbell row places stress on your lower back and should only be incorporated into your strength-training routine when your back is ready to handle the load.
Rowing exercises typically work your back muscles, but you can add a twist -- literally -- to turn a rowing activity into an oblique exercise. Strong core muscles, which include the obliques at the sides of your abdomen, help stabilize your body while you perform a variety of motions, including running, jumping and kicking. The obliques also help whenever you rotate your torso -- during golf and tennis swings, for example -- so oblique exercises are good additions to your workout program.
You can prevent your first row from getting messy in knit stitching by keeping your mind on a few key pointers. Find out what to do if your first row is always messy when you knit stitch with help from a knitting expert in this free video clip.
Barbell pullover rows always need to be done in a very particular way for maximum efficiency. Do barbell pullover rows with help from a fitness industry professional in this free video clip.
Working your back deltoid rows is something you can do in a few different ways depending on your preferences and skill level. Work out your back deltoid rows with help from this simple tutorial.
Certain joint movements are always going to occur during an upright row, which is part of what makes that exercise so effective. Find out what joint movements occur during an upright row with help from a fitness expert and certified personal trainer in this free video clip.
The upright row is an awesome exercise to get some especially amazing shoulders. Learn how to pull off an upright row for medial deltoids with help from a longtime certified personal trainer in this free video clip.
One thing that kayaking definitely requires is a lot of endurance. Build endurance for kayaking with help from a certified personal trainer in this free video clip.
Adjusting the rows in InDesign is a process so easy that it only requires just a few quick mouse clicks. Learn about adjusting the rows in InDesign with help from a well-versed web, graphic and illustrative designer in this free video clip.
Knitting round versus knitting row are two different techniques that can be successfully employed in a variety of different projects. Learn about knitting round versus row with help from a knitting and crafts professional in this free video clip.
Kayaking against water flow is a great way to work out a variety of different parts of your body at once. Find out about kayaking against water flow with help from a personal fitness trainer in this free video clip.
Dynamically filling a combobox is a function you can use to create drop-down lists in the Java programming language. You can fill a combobox located in a JTable using the Java loop function. The loop iterates based on the amount of items you want to add to the Java combobox. Each iteration adds a new item to the combobox, and you can use data imported from a file or hard-coded in the Java file.
The ResultSet object is used by Java and JavaServer Pages (JSP) to call a table of data from a MySQL database. The ResultSet object can be used to retrieve the rows of a database and display them in a JSP page. Notepad is a free, built-in text editor of Windows that allows you to edit JSP pages and insert the correct code to retrieve rows from ResultSet for MySQL.
Rowing is a water sport that combines athleticism with the art of boating. If you're interested in getting started with a team of single-scull rowers, which is just one of several forms of rowing, you'll need to understand the basics first. Knowing the fundamentals of the sport will help you determine if it's the best activity for you.
Build a fan-powered canoe by copying the design of an air boat. Air boats are popular in regions such as the Florida Everglades or the bayous of Louisiana. These crafts move through the water using an engine and a large plane propeller. A canoe can be adapted to use the same design, but on a smaller level. Add a lawnmower engine to your canoe to power a fan and glide through the water at a faster pace than rowing.
Too often, garden tools like shovels, rakes and hoes wind up propped in a corner of the garage or hanging from a nail or other makeshift hook. For your own safety and for ease of access to your tools, it's much better to create a safe and convenient shovel mount rack. Placed in your garage or on the tool-shed wall, a shovel mount rack saves you time when looking for tools to do a quick yard project.
SQL Server Integration Services (SSIS) lets database administrators set up packages that run several steps. Each step contains a SQL statement or database element that manipulates data. Use the data flow to delete rows from within the SSIS package. You delete rows using the "delete" SQL statement, which permanently removes data from any table.
SSRS reporting displays all values queried from your database server, so you may want to restrict some rows, such as duplicate records, from the user's view. You use SSRS expressions to further filter records and columns after the report displays the data from the database.
Creating your own tom cymbal rack by assembling the right parts will make it possible for you to design a custom rack that suits your needs. Parts for tom cymbal racks may be purchased individually from local music dealers and online retailers. Building your own rack will require that you purchase all the parts separately and assemble them yourself. Tom cymbal racks consist of a rod, legs to hold the stand erect, and mounts to keep the tom and cymbal in place.
Making a pool rack hanger is a useful way to display this lightweight tool when the table is covered or to keep it out of the way once you finish setting up the pool balls. The pool rack is generally triangular accessory that racks up the balls before a game of pool begins. Cover a pool table when not paying a game to protect it from dust and chalk particles floating in the air. Keep track of the pool rack by putting it under the cover or displaying it as wall art on a pool rack hanger.
Broom and mop racks elevate the cleaning tools off the floor to keep the heads of the tools in better shape. A broom resting on its straw will bend and distort over time affecting its function. Mops tend to get dirty and smelly if they are stored with the mop head resting on itself, the floor or another surface. The best way to store both mops and brooms is to hang the tools by their handles. Do this with snap-in type hangers or by more conventional simple hooks.
Resistance tube rows are designed to be performed in a very specific way. Do resistance tube rows with help from the founder/owner and director at STRONG Gym in this free video clip.
Drain racks are useful places to store freshly washed dishes while they dry. You can build your own drain rack using a piece of PVC pipe by cutting notches into it to hold dishes. Because the pipe is designed to be used in plumbing, you will never have to worry about rust or other types of water damage. This rack is quite simple to make, and a single piece of pipe can yield two racks.
The smaller your smoker, the more necessary rib racks become, especially when cooking for a crowd. By standing the ribs up instead of laying them flat, you can fit two to four times as many racks of ribs in the smoker — and the smoke time stays the same. Commercial rib racks can be found at any home and garden center or big=-box retailer, but if you find yourself in need of a speedy rib rack with items you probably have on hand, you can easily do it yourself.
Neckties hanging from a simple wire coat hanger tend to slide to one side, throwing the hanger off balance and creating a messy jumble of ties. Although retail outlets sell organized -- even motorized -- tie racks, such gadgets may seem pricy or frivolous. For a cheap yet effective alternative, make simple adjustments to that free coat hanger from the dry cleaner. Unwind the wire and bend it in a neat zigzag pattern, creating several horizontal wire lengths for organizing and displaying ties.
A wooden raft excursion on a small pond or lake can be a fun summertime activity. Building a raft of your own doesn't require any specialized tools or hardware. You can find or scavenge much of the raw material rather than purchasing it from a big store. If you already have a sturdy frame, then all you need is to gather logs for the top deck. Assembled properly, a simple raft can perform well on calm water.
Storing fishing rods while not out in the stream or on the lake can sometimes be a challenge, especially in a cluttered garage. Instead of leaning your rods in a corner of your garage, make rod holders for them. This will keep your rods in good condition and close at hand when you have a free afternoon to spend outdoors fishing. You can make your rod holders from PVC pipe and lumber. PVC pipe is easy to work with and affordable. Make the holder 12 inches wide, 36 inches long and 48 inches tall. You can store up to five…
A recycled bottle kayak uses empty plastic bottles, grouped together in a chicken wire cage, to create a floating watercraft. Such kayaks can be controlled using a traditional kayak paddle. Creating a recycled bottle kayak is a challenging project requiring creativity and experimentation. Basic guidelines can get you started, and then creative problem solving is needed to tweak the final product for use on local waters, as current and water conditions may require additional stabilizing features such as an outrigger.
SPUFI, also known as SQL Processing Using File Input, is a tool of the programming language SQL and is used specifically to create database objects. To create objects that will eventually be able to include a range of customized content, you will need to create a row or multiple rows to store the data in. This will help organize your information and lay the foundation for the entire database.
If you're interested in the Native American culture or are teaching children about Native American methods of transporation, you can easily construct a dugout canoe from cardboard. Understand, though, it's for display purposes only. You'll find all of the materials you need wherever craft or home improvement supplies are sold.
Instead of lacing your shoes in the traditional criss-cross style, make rows with your shoelaces using a bar lacing technique. Bar lacing creates the appearance of horizontal rows running between the eyelets of your shoes, with no crossed strands over the tongue. According to Ian Fieggen at Ian's Shoelace Site, bar lacing relieves pressure on the top of your foot. Making rows with your shoelaces may be more comfortable if your feet tend to swell throughout the day.
Knitting short rows is a method in which you knit a number of stitches in a row without reaching the end of the row, then turn the work back down the shortened row. Using short rows to create knitted square motifs gives the shapes a mitered appearance, with lines of stitches running both vertically and horizontally. Use virtually any size knitting needles or type of yarn to craft squares suitable to sew together into blankets, pillow covers or other projects. The garter stitch used in this pattern is accomplished by knitting each row, and keeps the edges of the square…
A homemade neck tie rack will keep ties clean and wrinkle-free. You can make a tie rack using an uncoated metal hanger, which will be bent into a continuous "S" shape. The ties will hang on the horizontal portions of the "S." The hanger hook will remain intact, making it easy to hang the rack in your closet. Avoid plastic-coated wire hangers for this project, as the coating makes it difficult to unwrap the end of the wire from the base of the hanger hook.
Airboats use air from a propeller to propel the craft through the water. You can find this type of boat in areas that have shallow water, such as Florida and Louisiana. You can make your own airboat from a canoe by installing a lawn mower engine. However, you will need a canoe that's sturdy enough to hold the weight of the lawn mower engine and one to two passengers.
Save space and reduce clutter at the entrance of your house with a wall mounted coat rack. Transform an unused or old yardstick into a functional accessory by converting it into a sleek coat rack. Your unique yardstick coat rack will impress guests and prove to be a conversation starter for visitors, even as they enter your home. With the help of a few simple tools, you can easily create this one-of-a-kind yardstick coat rack yourself.
Storing a kayak properly is important to protect it in between kayaking trips or during the winter off-season. Improper storage can damage of your kayak because the weight of the kayak causes stress where it rests. Plastic kayaks will especially warp with improper storage, so do not leave a kayak on your car rack for days at a time.
Kayaking, whether on the open ocean or raging river, offers a recreational sport for all ages and fitness levels to explore local wildlife and waterways. Not every river, bay or sea coast is alike, however, and beginner to expert paddlers need to understand the differences in equipment, safety measures and skill level required by river or sea kayak expeditions.
It's easy to purchase a kayak carrier for a pick-up truck. But if you want to save money, you can build your own carrier at a significantly lower cost. A kayak carrier made out of PVC pipe will not only support two full-sized kayaks with relative ease, but it will also be durable enough to withstand most weather conditions. The unique construction of this kayak carrier also allows the user to disassemble and fold it away after use.
Kayaks are individual paddling boats used by native cultures for centuries. The original kayaks were made of animal skins stretched over a hardwood skeleton. As the centuries past, boat makers learned that the art of kayak-making was in building a solid, waterproof keel and gunnels without contributing what most kayakers detest -- excessive weight. This led to laying thin strips of wood over a skeleton made of proportionately increasing, then decreasing, oval disks called stations. This classic double-ended kayak design can be accomplished with plywood strips over heavy plywood stations. Adding a fiberglass skin completes the new standard in kayaks.
A "DataGridViewRow" represents a row of data in a .NET DataGridView control. In Visual Studio you can set the row to read-only which means the user cannot select or edit the data or the row's properties. Visual Studio includes a designer where you can edit the read-only property for the row without typing any code to lock the row.
Eskimos, who introduced kayaks to the world, used them for hunting in their inhospitable Arctic habitats. Built to transport only a single passenger, kayaks helped the Eskimos hunt prey, such as fish, whales and seals. They used their catch for food, and used the animals’ body parts for clothing and to make tools. Boat builders have introduced modern versions of the Eskimo kayak.
Canoe paddles are made out of two different types of wood, which are then smoothed and curved. It looks like something a professional would have to do. The truth is; it is something a novice can do. Take your time and work step by step to make your own, homemade, personalized canoe paddle.
Mount a ribbon rack to the wall of your craft room to neatly store your rolls of ribbons. Your ribbon will be tangle-free and easily accessible for all your craft projects. The base of the rack is made with an open wooden picture frame and can be made in a variety of sizes. Attach the rack to the wall with standard screws and picture frame hooks.
An easy way to hang a kayak on a brick wall is to build a shelf for it. A pair of padded shelf brackets spaced a third of the way from either end of the boat supports the boat securely. Screwed to the wall with masonry anchors, a shelf support gives you a quick, sturdy and easy-to-use kayak hangar for just a few dollars and less than an hour’s work.
Canvas is a heavy-duty fabric used in making tents, sails and other items where high strength is required. A canvasback kayak is a sturdy, lightweight, one-man boat made of wood and canvas. The canvas must be waterproof to keep the kayak afloat. There are several methods to waterproof canvas, but the one best-suited to a kayak is a chemical spray application.
When not in use, a kayak should be stored so that it's shielded from exposure to snow, rain and direct sunlight. It must be stored in a way to protect its edges and surface from contact with other items and also so that it poses no danger to others who walk near it or under it. If it isn't currently being used for other purposes, hang the kayak from your garage ceiling using a harness designed specifically for this purpose.
