Discover the expert in you.
Discover the expert in you.
While hulls are divided into classes, such as planing hulls that slide over the water and displacement hulls that act like a float, the type and design of the hull isn't especially important. You can isolate the cold molding process from the hull shape and even the fitting out of the hull, once it's complete. The cold molding process remains the same. Essentially, it's the building of a custom, single-form laminate or plywood shape from multiple veneers.
Radio controlled (RC) boats are a hobby young and old boating fanatics enjoy. Sailboats, speed boats and military boats are just a few of the many RC boat designs enthusiasts enjoy. These boats are powered by electric motors, gasoline engines and even wind-powered. However, despite all of these differences, RC boats made of fiberglass or plastic all begin with a boat mold.
Many boats include plastic molding or trim pieces around the boat. If the molding pieces are white, they may turn yellow with exposure to the sun and outdoor elements. It is possible to clean the molding and remove the yellowed color from the surface of the plastic. After cleaning the molding, apply a plastic protectant or wax over the molding to prevent yellowing in the future.
Polycraft is an Australian company which opened in 2001 manufacturing small, outboard motor-propelled, polyethylene boats (motors sold separately). They are mainly used for pleasure outings such as day trips for fishing and water skiing.
Building a boat mold is one of the first steps in building a fiberglass boat. In short, the process involves building a plug, which is an exact duplicate of the boat you want to build. For small boats, like canoes and kayaks, the plug is often made from wood covered with fiberglass. Prepare the plug and then laminate a fiberglass shell around the plug. When dry, pop out the plug and finish the inside surface of the mold. Lay up the boat on the inside of the mold.
Let's face it: boating is a water sport. That means that, eventually, moisture can accumulate in every part of your boat and, with moisture and the right "starting place" mold will grow. The two part--and quite obvious--answer is to lower the moisture and eliminate the things where mold can gain a foothold. Once mold gains that foothold, your choices for removal are limited. It's better by far to take preventative measures to remove mold from your boating environment.
Boat cushions are typically made of vinyl, making them easy to clean. Mold can form on boat cushions due to their exposure to water. Mold thrives in moist environments and boat cushions are ideal breeding grounds. Not only is mold unsightly, it can also eat away at the fabric. Cleaning mold from boat cushions promptly will keep the cushions looking neat and protect them from deterioration.
Vinyl boat upholstery offers fantastic growing conditions for mold and mildew. The heat, humidity and dark nooks and crannies of a boat cabin provide the perfect situation for mold to occur. When it happens, and it certainly will, you need a winning strategy to rid your vinyl upholstery of the stuff. One way to rid your boat of mold and mildew is an all-natural concoction of items that are probably in your home right now.
Mold propagates with tiny spores that exist virtually everywhere and just love to grow on your boat. Removing mold and mildew can present one of the greatest challenges for today's boat owner. Heat, moisture and the many cracks and crevices on a boat, along with carpet, bedding and seat cushions, provide the perfect growing conditions for mold. Once mold has taken root on your boat, you may find it difficult to remove.
Black mold is not only disgusting to look at -- it's also dangerous to your health. Breathing the mold spores can cause respiratory problems and severe allergic reactions. When you're cleaning mold off a boat or applying a fungicide, wear rubber gloves and a face mask or respirator to protect yourself. Here are some steps to take to remove mold and keep it from returning.
