Floors

Laminate Flooring is a great alternative to hardwood or marble flooring. It's much cheaper, and requires a considerable amount less maintenance. Even though it is superior to damage, it can still...

Dummie clip.

The cost of the installation of hardwood floors varies based on a number of factors, but typically the wider the flooring is, the more expensive the job will be. Discover how various wood species...

The restoration of old wood flooring is often done with polyurethane, but some people choose to simply use wax to restore a floor. Find out how different colors of stains can be used when...

In order to sand and refinish parquet wood floors, the best option is to hire a professional contractor to do the job. Discover alternatives to refinishing parquet flooring with help from the...

Preparation for hardwood floor installation begins with setting up an appointment with a professional to assess the potential project. Learn more about hardwood flooring options with help from the...

Cork floors is considered to be a green floor, and is known for being soft on the inside and harder on the outside. Discover how cork is harvested from the bark of trees with help from the owner...

You can cut tile with a side grinder. Renting or buying a wet saw is expensive. For less money you can use a side grinder to get the job done. Side grinders are actually easier to use when cutting...

Matching grout color is an art, not a science. Age, use and cleaning products can discolor existing grout so much that using the original color to fill gaps or to add more tile to the same...

The normal installation process for wood floors involves nailing or stapling the floor into place. But, if you're laying the floor over a surface that won't hold nails (like a cement slab or a...

Modern hardwood flooring systems fit together by tongue-and-groove milling on the sides of the floorboards. Pneumatic floor stapling systems secure those boards to the underlayment while pressing...

An inexpensive way to change the color of ceramic tile floors is the use of primer and paint. This type of renovation process should be considered a temporary application and not a permanent...

Concrete is one of the most commonly used building materials for homes today. Some flooring materials, most commonly hardwood floors, require the application of a plywood subfloor prior to...

Painting a floor can be a cheap and easy flooring alternative to carpeting, bare wood or tiling if the painting is done properly, and, if done with a decorating scheme in mind, can be pleasing to...

Large floor tiles tend to create a different set of installation difficulties than smaller tiles. The size and weight of large tiles makes them harder to move around and set, and, once placed,...

Lay a 3/8-inch engineered floor for a quick and easy way of getting a hardwood floor look. Unlike 3/4-inch solid hardwood tongue-and-groove floors, engineered floors comprise a wood composite...

The floor that you walk on is usually the third layer of flooring that's under your feet. The first layer, subfloor, is generally plywood that's secured directly to the floor joists, then an...

Laminate flooring is generally simpler to work with than solid wood, because it's lighter, straighter, and designed to more easily assemble. One area where it's a little more complicated, though,...

Laying laminate flooring is a fairly easy do-it-yourself project, but you will want to make sure you properly install the floor, especially in high-traffic areas such as doorways.

Pine boards are a great construction material. Relatively inexpensive, they are a choice wood to use in both floor and wall construction. One of the benefits of using them as a wall finish, is...

Laminate floors today are generally installed as "floating'' floors. This means the boards are not actually attached to anything except each other. The floor trim around the perimeter of the room...

Slate tile, like all natural stone, is porous, and should be sealed with chemical sealant during installation to prevent moisture penetration and stains. The sealing process isn't...

Laminate flooring is a good choice for kitchens because it is durable, attractive and inexpensive compared to tile or hardwood. Laminate flooring is unique in that it takes on the appearance of...

Unfinished hardwood flooring allows you to sand and custom-finish the flooring after it's installed, to create a smooth, even, customized floor. You can finish it to match other existing flooring...

Pergo is laminate flooring that can be installed over almost any existing flooring and requires no glue, staples or nails. Costing generally 40 percent less than real hardwood flooring and more...

Using in-floor heating to heat your home is a concept that has been around since the days of the Roman Empire, and has been become more popular in the past few years. It's a great way to warm up...

Before laying concrete in a basement you have to install a layer of protection from the moisture that tends to collect in sub-ground areas, that would otherwise damage the surface of your basement...

Painting vinyl tiles is a creative way to update your kitchen, bathroom or entryway flooring on a minimal budget. Before you proceed, it is important to understand that painting vinyl tiles isn't...

Oak floors are milled with tongue-and-groove connections on the sides, so they will fit tightly together during installation and stay that way afterward. Most of the floor is laid with a pneumatic...

Stick-on tiles can be a blessing for those who have chosen to install their new floor themselves rather than hiring a contractor because they eliminate the need for mixing and spreading...

If you've ever looked carefully at a well-laid hardwood floor, you'll quickly notice that no two boards line up at the ends. If it's been done right, no two boards will even be within six inches...

OSB, which stands for Oriented Stran Board but which is also known as "Chip Board" is a popular subfloor due to its low cost and durability. Manufactured from wood chips and resin, OSB makes for...

Hardwood flooring is installed in courses, starting at one wall and moving across the room to the other wall. You don't want to get most of the flooring installed, then discover at the opposite...

Diagonal designs catch the eye, especially when framed with a border. They look as if they use more tile and require a high degree of skill; actually, neither is true. Therefore, laying out vinyl...

Hardwood flooring is a great way to increase the value of any home. With prefabricated interlocking hardwood flooring, it is very simple to install, and requires no nailing or gluing. A simple...

An easy way to help stop mold and mildew growth under your house, and get rid of the accompanying damp smell, is to place a vapor barrier under your house. There are several commercial products...

Floating floors are flooring systems that aren't glued or nailed down, but just sit on a bed of foam, held in place by the floor trim at the edges of the room. Engineered hardwood is one of the...

Homeowners might seal brick floors to protect them from stains, create a glossy surface or reduce grit that can mar adjacent floors. There are two types of products used to seal brick floors:...

Painting a wood floor has generally been seen as a cost effective method of salvaging a floor that might not be worth refinishing. However, painting a wood floor can also be a great way to add a...

The trickiest part of tiling a bathroom floor is dealing with the toilet. There is almost never an instance in which you'd want to tile around the toilet, so you have to remove it, tile the space...

Tired of that worn out old carpet, but don't think you have the ability - or the budget - to install a hardwood floor? Try a laminate "floating" floor. It's fast, easy, and could be a...

Interlocking laminate floor tiles are a wood composite material topped with a plastic veneer that mimics different kinds of flooring, including ceramic or stone tile, cork, or wood. Unlike all of...

The purpose of laying cement backerboard is to provide a stiff, smooth and continuous surface as a base for tile.Backerboard must be properly oriented and secured to ensure that it provides a...

Snap-and-click laminate flooring is made with ease of installation in mind, removing many of the nuisances associated with installing a new layer of flooring. No longer will you need to glue or...

Hardwood flooring is an attractive durable surface for any room, and with planks being specially made for quick installation, entire rooms can be completely covered in flooring in a matter of...

Hardwood flooring requires a strong, stable subfloor for proper installation. With the correct preparation, a concrete slab provides a level, durable and long-lasting surface that protects the...

Gluing down hardwood flooring is a complicated process, requiring you to painstakingly place each plank, perfectly lined up to provide a beautiful surface that can last decades. Removing those...

Plywood has several advantages over other surfaces as a subfloor for laminate flooring. Installing a laminate floor requires a flat, level surface, which plywood tends to provide. If it's not...

Heating a floor, such as those found in a bathroom, will require installing a mechanism to heat the floor called underfloor heating. Underfloor heating consists of pads that sit under a tile floor...

Hardwood floors that are installed in a home come in two types. One type is called a floating floor; it is not secured with nails. The other type is secured to the subfloor using staples or nails....