Woodworking

Here is an easy cutting of a homemade Christmas ornament on a scroll saw. They are easy to do. You may hang them on a tree or hang them around the house and even use them as a sun catcher.

A good quality wooden hand plane can be costly, but there is no reason the plane should not last a lifetime and be passed on to the next generation of woodsmiths in a family. Woodworkers may not...

Power tools make woodworking and home improvement projects much easier. Adding a mitre saw to your collection of power tools allows you to cut trim, molding, picture frame components, and so forth...

The radial arm saw has a three-part table system that you will have to adjust and replace from time to time. Most radial arm saws are built with a steel frame and a wooden table top. The main...

A table saw allows you to make straight, accurate cuts every time, as long as the tool is properly maintained and adjusted. The table saw is the workhorse in any woodworking shop. An tablesaw...

The radial arm saw was the industry standard for many years for crosscutting and mitering applications. It has been replaced in many shops and job sites with the smaller sliding compound miter...

The radial arm saw has a sacrificial front table that you must replace from time to time after use. Most radial arm saws are built with a steel frame and a wooden tabletop. The main reason for...

Patterns are used in a variety of arts and crafts. They act as a template for creating shapes out of materials such as fabric or clay. Each material requires a pattern made from a different...

The typical sword of the Roman infantryman was called a gladius. According to Nigel Rodgers, it was worn on the right side. This made it easier to draw because of the soldiers' large shields on...

In this age of mass produced power tools, many people may have forgotten about old-fashioned hand saws. Many are languishing in the bottom of tool boxes or in the back of tool sheds, rusted and...

The bokken, as a wooden katana replica, provides a safer alternative to training with a live, razor-sharp samurai sword. Carving your own bokken provides you with a practice weapon with strengths...

A band saw is one of the most useful tools in any wood shop. The narrow blade can be useful in cutting curves of retailed work, but can also be used for larger jobs. However, as with all tools,...

Table saws and compound miter saws can both be valuable power tools for woodworking, but each piece of equipment has its own strengths and limitations.

A push stick is an essential accessory for woodworking, and keeps your fingers safely away from spinning blades and bits while cutting or shaping wood. Used primarily with a table saw, a push...

Traditionally used for purposes of agriculture and crafting, the hand ax became a dominant weapon for northern Anglo and Celtic medieval cultures. Traditionally constructed "full tang," with blade...

Woodworkers and hobbyists use scroll saws to cut intricate designs in wood, plastic or metal. These saws can also be used to create interesting wood joints, such as dovetail joints. Scroll saws...

The Sears Craftsman reciprocating saw is a useful tool for any number of household chores. A dull blade might need changing or replacing sooner than expected.

Bosch jigsaws are equipped with a variable speed controlled trigger switch. That means the speed of the drill is controlled by the pressure you apply to the trigger switch. They also have brakes,...

Types of hand planes include bench planes, jointer and fore planes, jack planes, block planes, smooth planes and rabbet planes. Though there is a wide variety of planes, they are all fairly...

Band saws have quite a lot of wear-related maintenance requirements. The drive belt can become worn or even break and need replacing; the brush inside the saw housing can become worn and need to...

Band saws are used for scroll cutting and circle cutting of wood and wood composition products. Although they can make straight cuts too, they are designed to make intricate, curved cuts. The key...

Table saws and radial arm saws look quite different, but they perform many of the same tasks. Table saws are simpler, and if you have the space for one, in most cases it would be your best choice....

A band saw cuts or rips apart wood using a long, continuous moving blade. The flexible blade, a metal band with cutting teeth on it, moves around two or three pulleys in one constant direction...

A Sears circular saw is a dangerous tool if it is improperly used. It is also dangerous to replace the blade if you don't follow proper procedures.

While they both perform most of the same range of woodworking functions and are generally chosen for experience and personal preference, the table saw and radial arm saw are distinct examples of...

One of the nice things about a miter saw is that it allows you to make extremely accurate cuts at almost any angle you wish. The Makita miter saw allows you to change the blade angle and the...

Whether you are using square or round stock for making parts, you can use a metal saw to make precise cuts for finished products or to use as raw material for CNC or manual milling. By making sure...

Connoisseurs of antique hand saws love them for the craftsmanship they possess. This craftmanship, however, is often hidden under layers of grime and rust. This is also a problem for those who use...

Making cheek cuts -- the part of the tenon that is parallel to the face of the board -- for tenon joinery can be a little unnerving because the wood must be kept upright and can tip into the...

A frame saw is a style of rip saw featuring a flexible slender blade held between two opposing sides of a four-sided wooden frame. Use sugar maple wood to build the frame saw because of its...

Changing the blade on a miter saw is not as difficult as many think. However, it does require some knowledge of the tool and concentration while performing this task. It is important to ensure...

It's important to know the right way to change the blade on your table saw, because you will be changing it often. Even if you use only one combination blade for both rips and crosscuts, you still...

The adz is a tool used for shaping and trimming wood, especially logs and timber. Though it has mostly been replaced by the sawmill for squaring off wood, the adz is still a useful tool for...

The most reliable way to sharpen planar knives, usually called planer knives, is to send them out to be professionally sharpened. Professionals have years of practice and can obtain a nice edge...

Using table saws for crosscutting and ripping lumber barely taps the potential of these common woodworking machines. With a range of jigs and accessories--some manufactured and some homemade--the...

Learn to make A Roman Gladius or shorts word carried by the Roman Legions! A fun and easy way to make a Wooden Gladius.

A scroll saw is a particular kind of electric cutting tool that is used for making intricate details. This type of saw uses thin blades that cut fairly thin wood or other materials. It sometimes...

A scroll saw is a versatile piece of woodworking equipment, allowing a user to carve intricate shapes into the wood he is cutting. Utilizing proper form and technique when using your scroll saw is...

Anyone who owns a circular saw will eventually need to change or replace the blade. Blades wear out and need to be completely replaced. Or you may need a blade of a different size, or one that is...

An adze is an ancient, flexible woodworking hand tool that is used for cutting, shaving, peeling and chipping away at a wood surface. Its combines the capacities of an axe and a chisel and can be...

No matter what brand, good wood turning tools share fundamental qualities. Tools forged from heavy tool steel cut with less vibration or overheating. Since resharpening is a constant task in wood...

Not removing the safety devices that come with the machine should be the first safety rule. Blade guards and splitters are there for good reasons. If the operator follows correct procedures, these...

Using a radial arm saw needs to be as easy as possible for safety reasons and quality of work produced. The versatility of a radial arm saw makes set up potentially complicated. Many other tools...

Use a jigsaw tool to make curved cuts or interior cuts for crafting wood. The thin blades on these power tools permit cutting around tightly curved designs for artistic touches. The free-floating...

A good table saw is one of the most versatile machines available to the home woodworker. Table saws are also responsible for about 60,000 injuries annually in the United States, and the work...

The ability to create intricate designs in wood has been around for centuries. More recently, scroll sawing has grown into an increasingly popular arts and crafts hobby. Scroll saws have evolved...

Scroll saws are the tool of choice for creating intricate designs in woodworking projects. The small blade and simple operation make an excellent combination for producing eye-catching fretwork...

A biscuit joiner is a small woodworking power tool designed to cut small slots into area where you intend to join two pieces of wood. Specially designed chips of wood called "biscuits" are glued...

Planers are used to smooth the rough surface of a freshly cut board. A planer may have a single knife or multiple knives mounted on a high-speed roller. As the rough board passes under the knives,...

When it comes to tablesaw-blade cleaning, I've tried about all the cleaning-solutions out there, both commercial and home-made. Among all those options, I've found that one called Simple Green...