Satellite TV

Dish Network satellite systems that are installed for a typical home can have more than one receiver set up to work with the dish. Using more than one receiver requires having at least a dual LNB...

A multi-switch is used to connect multiple satellite receivers, such as those used by Dish or DirecTV, to a single dish. Multi-switches come in various types depending on your dish and the setup...

The easiest way to send satellite programming from a satellite dish to the television is to connect the dish to the satellite receiver, then the receiver straight to your television. However, you...

The easiest way to connect a satellite receiver is straight to your television. However, you can run your satellite system through the VCR then to the television. This allows you to record...

If you already have the satellite dish and cabling you use for SKY, you can simply hook up a store-bought free-to-air satellite receiver to take advantage of the U.K.'s new Freesat service....

When you install a satellite dish, you mount the actual dish onto a roof so the dish can receive the appropriate satellite signal. Installing a satellite dish does require precision because a bad...

Free to air (FTA) satellite receivers allow viewers to receive satellite programming syndicated globally using unencrypted satellite signals--meaning you don't need to pay a satellite company to...

This article will walk you through steps to troubleshoot your satellite box. Most people get very frustrated when their TV stops working, and service calls can be very expensive. If you follow...

Hooking up a multi-switch to your satellite dish allows you share you satellite signal with multiple receivers. Using a standard splitter would cause a setup with multiple receivers to conflict...

This article is going to detail, from start to finish, the various steps associated with installing two receivers for a Dish 500. There are several benefits to being able to do this on your own....

A big satellite dish is available in C-Band in which a 10-foot diameter dish is used to receive satellite programming. A C-Band satellite system is controlled by a receiver that moves a dig to...

An in-line booster can greatly improve the picture quality of your satellite programming. A booster is especially useful in setups that use a split or long lengths of coax cable. You can even...

Plenty of high-quality satellite programming is beamed constantly around the globe, and all it takes to enjoy free programming from broadcasters around the world is some used satellite equipment....

Purchase the necessary components of a "Free to Air" satellite setup either online or locally at a pawn shop or a thrift store. You'll want good outdoor coax cable to run from the dish outside to...

If you are trying to hook up an electrical device that requires a coaxial cable to move signals back and forth, here are the things you need to know.

A DirecTV system can be setup in a variety of ways. Typically, a dish is installed, and a coax cable line is run from the dish to receivers placed within the home. Adding a fifth receiver to...

This article is on how to install a satellite dish and lnb's on your dish. If you can find North, you can install your own dish to receive your favorite channels.

Wiring your home for coax cable is quite a task. There are many reasons to do it, however. You may be thinking of adding a satellite dish or having cable TV installed and want to have the signal...