Direct TV Videos

Wiring a DirecTV dish involves connecting it to the DirecTV receiver in addition to running a cable to the television. See a DirecTV being wired with information from an electronics store owner in...

Hooking up a Phillips DirecTV DVR allows the user to record two programs while watching a third recorded program, enables three different tuners to be working at the same time. Install a DirecTV...

Programming a DirecTV card involves removing the old card, following the prompts on the Menu screen and inserting the new access card into the front right-hand corner of the receiver. Program a...

To hook up a third TV to DirecTV, the LNB must be removed from the dish, and another coaxial cable should be connected there, as there are four available outputs for four televisions. Add a third...

Installing an HDMI cable to DirecTV simply involves plugging in the cable to the jack labeled HDMI output. Hook up an HDMI cable to a DirecTV receiver with information from an electronics store...

Installing a DirecTV dish with cable enables the consumer to access both the cable and the satellite receiver signal, as turning off the satellite receiver allows the cable signal to pass right...

A DirecTV dish must be installed by a professional to get the best reception, and it usually requires a J Pull mounting nest. Get a DirecTV dish installed with information from an electronics...

Hooking up a VCR to DirecTV requires using a standard RF or coaxial input connection to send a signal from the satellite receiver into the VCR or DVD recorder. Hook up DirecTV to external...