Body Shops

Rust on a car body is a bigger problem than just looking ugly. The rust will spread over time across the body and gradually eat away at the metal, so it needs to be cleaned off before it gets that...

You need to follow certain steps when using body filler to repair dents or other damage on a car body. If you don't use the filler the right way, the vehicle may end up looking worse than when you...

Rust is never a good thing for a car to have, and when it happens, it has to be dealt with as soon as possible. Flash rust happens when water is left on the surface of bare metal for too long and...

The easiest and best way to treat rust damage is to hit it hard and early. The sooner you stop rust from forming, the better your chances of removing it successfully. If you live in an area that...

Lead was the first popular body filler that was used by many auto factories and repair shops alike. Lead is melted into gaps and along seams, but if it is not properly applied, it will crack and...

A dent can come in all shapes and size. In some cases, a larger dent will require the entire body panel be replaced. In other cases, special pulling equipment is required to straighten the panel....

One of the steps involved in body work preparation before a car is painted is a system called "block sanding".This is an all important step which allows you to obtain very flat smooth surface...

Wet sanding new paint on a car is very important if you want to get that paint to look it's best, having a glassy smooth look and feel! Wet sanding is meant to flatten and level out new paint,...

Bondo Body Filler is used quite often in auto body work. It is a body filler that fills in dents or creases. It is used to sculpt a curved area--and is also used over areas where welding has taken...

Ever had a deep dent in your plastic bumper, most shops will charge you 200bucks for the parts, and about 120ish for the paint and install, why pay when u can fix them for free. NOTE: This fix...