Electrical Repairs

Home telephone wiring is your responsibility as a homeowner. The phone company is only required to provide a working telephone signal to your Network Interface Device (NID), which is the box on...

Before you begin to replace your house wiring, consider a few factors. First, are you comfortable with or capable of doing such work? Are you saving a significant amount by doing it yourself? Will...

A junction box is the place where electrical wires meet and are spliced together. Electrical junction boxes come in an assortment of shapes and sizes according to need. Large junction boxes can...

Telephone wiring in a house seldom breaks along its length. Construction or disruption to walls, ceilings and floors are the most likely causes of broken telephone wires. Problems at the jacks...

Residential electrical diagrams vary according to what the diagram is for and who is compiling the information. These kinds of diagrams are helpful in aiding homeowners in not only wiring their...

Wiring your own electricity is a challenging, yet do-able, project that can save you thousands of dollars. An older home may have a combination of wiring, some of which may have been improperly...

Light-switch wiring connections often go bad because they get loose or because the wire ends were positioned too closely to one another, causing a short-circuit. Fixing this involves pulling out...

Fixing up a home or any other sort of building takes a lot of time and commitment. Electrical wiring is an important aspect and it is essential that if you aren't sure how it works, then you...

Installing electrical outlets in new construction is much easier than working with existing walls, as you're not dealing with sheetrock. Planning out the location of each outlet is important to...

Electrical wiring comes in a wide array of configurations and materials. Modern electrical wire is comprised of a metal conductor surrounded and protected by a non-conductive insulator. In a few...

Electricity can jump from wires to nearby people, metal or other conductors. To prevent this, a nonconductive material must be used to guard against short circuits, shocks and fires. Insulation...

In the world of electrical lighting, you might think that any fixture works as well as any other fixture. After all, its main purpose is to be a repository for a screwed-in light bulb, and then...

Thermoplastic High Heat Nylon (THHN) is a common, low cost insulator that is used to cover a variety of copper and aluminum electrical wiring and cables. It is generally used on wiring rated for...

Wiring a home can be a very complex and time-consuming task. There are a great many things to consider and carefully planning is required. Since a mistake could result in a destructive fire, you...

Updating your home's interior lighting can be exciting, and with the proper planning, will add that extra warmth to your newly remodeled home. Many shapes and styles of recessed lighting fixtures...

Wiring a home is not for the meek. Wiring can be very complex, hard physical work, and considering mistakes can result in severe injuries or fire, there is also most certainly an element of stress...

Approximately 90 percent of the homes in the United States are wired using nonmetallic (NM), sheathed cable, known and referred to by the trade name Romex. Sheathed cable is convenient and easy to...

Pendant lighting is typically installed in a kitchen to use over an island or bar. Install pendant lighting to replace an existing light or to add a new fixture. You will need to mount a pendant...

When wiring your home it is important to have a carefully conceived plan. Proper wiring is critical to your lifestyle as well as your safety. Develop a plan to guide you through the wiring process...

Circuit breakers are used to complete a connection within a building. The wires are run from the breaker to wall outlets and light switches throughout. When a circuit breaker is turned off, it...

Three-phase motors are used almost exclusively on three-phase power. There are two voltages in which the three-phase motors operate: 240 VAC and 480 VAC. In almost all applications, three-phase...

When building your home, a good way to save money is to do the wiring of the house yourself. The labor hours involved in wiring a house can create a pretty steep bill, not to mention the...

House wiring is a complex beast for the uninitiated, and a sense of mystery for those who have never even seen a circuit. The wiring in your house does not need to be difficult to understand--in...

Concealed within the walls, attic and crawl space of your home is the electrical system responsible for powering what has become the essentials of modern day life. Altering or modifying this...

Wiring a ceiling light requires attention to detail and security. Ceiling lights are difficult to install because they are suspended. When you add in the danger of electrical injury, they become...

REPLACING A LIGHT SWITCH IS SUPER EASY AN ONLY TAKES A FEW MINUTES. YOU CAN REPLACE OLD LIGHT SWITCHES WITH DIMMERS, DECORATIVE SWITCHES OR EVEN A TIMER SWITCH.

Pull switches are commonly integrated into ceiling light fixtures. In this way, you don't need to have a wall switch connected to the light in order to turn the ceiling light off and on. Wiring of...

Locating active wires hidden behind walls is made simple using the method described. There are no hazards and no specialized tools or instruments are required. A bright child could do it.

A new light fixture can brighten a room considerably and add flair if you are replacing an outdated fixture. It is a simple and inexpensive way to brighten the mood in a room. There are a few...

To some, telephone jacks are a mystery outlet for telecommunication devices. These jacks do not have to be shrouded in mystery, though, as they are essentially basic, low-voltage electrical...

Circuit breakers trip and fuses blow all the time. The cause of the problem, however, can vary. One of the main issues is an overload in the wiring. Wiring in homes is set up in sections. One fuse...

You can bring a contemporary look to any room by changing out an old ceramic light fixture. It's a relatively quick home improvement that can be done with very little tools and know-how. The...

When you're wiring for new construction or remodeling, you may want to add an extra light switch, electrical outlet or other junction for wiring. The crucial part of this project will be something...

A malfunctioning ceiling fan and light can be aggravating, but do not junk the fan that quickly Many houses don't have proper wires, or the kit you bought may not be wired the same way as the...

Doorbell wiring is easy and safe because it uses low voltage wiring. It's important to disconnect the house power before the doorbell transformer is installed.

Home circuit breakers come in two types: single pole (120 volts) and double pole (220 volts). Common appliance ratings range from 10 to 40 amperes, although higher amperages are sometimes...

An assumption is that the question to be answered in this article is; "How to Change a Ballast in a Fluorescent Light?" The word, "ballast" has two l's and occasionally needs replacing in...

Hooking up a phone line to the main board, is a little tricky, but it can be easily done when following the proper directions. Whenever doing any type of electrical wiring on a house, it is always...

The lifetime of the wiring in a house is determined not so much by material deterioration, but more by the fact that electrical systems in many older dwellings are obsolete. Some heavily used...

Many homeowners attempt to save money by doing minor repairs and upkeep themselves. Often times this could be dangerous, such as when those without the proper experience or know-how try to fix...

House wiring begins when the power company releases power that is generated by turbine generators. These generators may utilize fossil fuel or nuclear energy. The power travels through the lines...

The purpose of using a wire connector, or wire nut, is to join a device or switch into a circuit with the wiring of the building. But how it works begins with the splicing before it is attached....

When you own your home, you learn that there is a never-ending list of jobs that need to be done. Some are expected and others aren't. One of the jobs that comes up that many people aren't...

Even the most attractive chandelier is of little use if the wiring has gone awry. The lights may flicker, and worse, you may have a potential fire hazard. Rewiring a chandelier is the answer in...

A home with old wiring promises to be a constant headache. Rewiring your house to make it code-compliant will make your life easier and your family safer. There are, however, some things you can...

Wiring a touch module in your lamp will enable you to transform your old lamp into something new and different. There are different type modules you can buy such as 3-way or 2-way. These...

There are a few reasons why a fluorescent light fixture may need to be changed or replaced. These reasons include: updating the look and/or style of the fixture; a rolling or swirling light...

Aluminum house wiring is a great way to wire your house. It is quick and simple, but there are some problems that it can cause.

Working with electricity can be a dangerous--or even deadly--endeavor, so be sure electricity is not flowing before attempting to replace an electrical switch. If your house has a breaker box,...

If you have an old floor lamp, there's a chance that the wiring has become frayed or worn. Worn-out wiring can present the possibility of electric shock or can be a fire hazard. To replace...