Electrical Repairs

The ballast regulates the electrical current and amount of voltage received by an electric light. Without the ballast to regulate the current, a light can draw too much power from the electricity...

When you switch on an electric lamp or light, the ballast is responsible for supplying a load of electrical current strong enough to turn the light on. The ballast is also responsible for...

Most people are familiar with the concept of using an electrical switch to turn an electrical device (such as a light bulb) on and off. However, electrical circuits can also be wired to connect...

When the light bulb in a light fixture burns out, most people simply replace it with whatever sized light bulb they have laying around the house. This is a dangerous habit that can increase the...

Use a common potato to safely and easiy remove the bottom part of a lightbulb that's broken off in the light socket after you've tried to unscrew a bulb.

Need to remove a broken light bulb? Whether your light bulb blew out or you just broke it, without something to grab a hold of, removing the rest of it can be tough. Not to mention dangerous. Here...

Light ballasts are also known as control gears. They are small devices used to limit the current passing through such devices as fluorescent and neon lamps. Light ballasts are a necessity for...

Light bulbs often break while still in the socket of a lighting fixture. Although a recessed ceiling socket is often inconvenient to access, you can remove a broken bulb base from a recessed...

How to remove that broken lightbulb without getting hurt. Safe and reliable. Be careful not to get cut or shocked.

Accidents can happen, and sometimes a light bulb breaks while it's still in the socket. Maybe your kids knocked over a lamp, or maybe the base came apart from the bulb when you tried to unscrew...

Sometimes light bulbs burn out in the worst possible places, such as an area that you can't easily reach due to the height of the bulb. The proper tools can help you get to the burned out light...

Troubleshooting a light fixture is usually a simple matter of testing a few components. The problem is nearly always with the light bulb, a loose wire, the switch or the circuit breaker. Before...

If you go to unscrew a lightbulb, either from a lamp or a wall or ceiling fixture, and the whole socket moves without releasing the bulb, it means your socket has come loose in its setting. Don't...

If you have a lamp that only burns a single wattage bulb, do not throw it away. It can easily be converted to accommodate three-way bulbs by changing the switch. The job will be easy because the...

This tool will enable removal of the remains of a shattered light bulb from the socket. If shards of glass remain then a potato sliced in half and pressed against the glass may provide enough grip...

Most everybody knows how to change a fused light bulb - just switch off the light, unscrew the old bulb, and screw in a new light bulb - but what do you do when the glass off the old bulb has...

Have some basic tools handy: a small flat-blade screwdriver, sewing-machine oil, a thin green fiber cleaning pad, and a test light. Confirm the problem is not just a burned out bulb. If you find...

Sometimes when you try to replace a light bulb it will twist apart leaving the base in the socket. Keep reading to learn an easy way to remove it.

When a light bulb breaks in a lamp or fixture, it can be dangerous to try to remove it. Here is a quick and easy way to remove the entire bulb without getting hurt.

turn power off to light, or throw the breaker to the light, but make sure the power is off, then take a pair of needle nose pliers stick the end into the socket and pull out on handles of pliers,...

High pressure sodium lights are used for illuminating large outdoor areas. They emit bright yellow light. Typically these lights are used on sides of industrial buildings and in some street lamps....

Being in the dark is no fun. Changing a burned out light bulb is a relatively quick process, but there are a few steps to keep you safe, not only from electrical shock, but to ensure safe...

A regular light bulb uses a glass envelope that surrounds a filament of tungsten wire for the electrical currents. Contact wire and conductors connect to the base and provide the filament with the...

This article will show how to check a flashlight bulb to see if it's working or not. Often times when a flashlight quits working exactly what is wrong is not known. Checking the bulb and batteries...

You can bring a contemporary look to any room by changing out an old ceramic light fixture. It's a relatively quick home improvement that can be done with very little tools and know-how. The...

Have you ever tried to turn on a lamp at the switch and it did not work? There are easy reasons for this to happen - a burnt out bulb, a turned off outlet, a frayed cord or simply, a power switch...

Pinpointing a short circuit in your home appliances doesn’t have to cost an arm and a leg.

One way to extend the life of a lamp's on and off switch, is to turn the lamp on and plug it into an electrical outlet that is connected to a wall switch. That way the switch will rarely need to...

Fluorescent lights produce bright, clear light and are both efficient and economical to run. Though they come in many shapes and sizes, fluorescent lights are commonly found in work areas and shop...

You need to read the wattage of a light bulb when your light bulb fails and you need to replace it. The wattage of a light bulb is the brightness of that bulb in wavelengths. If you read the light...

You might not know it by looking at it, but the common screw-in light socket is a clever application of physics and precision manufacturing. The socket is designed to get electricity from...

Electric lighting has become such a normal part of life that it is often forgotten that the invention of the light bulb literally changed the world forever. What took Edison countless hours to...

Even the most attractive chandelier is of little use if the wiring has gone awry. The lights may flicker, and worse, you may have a potential fire hazard. Rewiring a chandelier is the answer in...

The main items you'll need are a halogen bulb (which can be either new or burnt out) and a bunch of LEDs. The bulb will need to have the glass cover taken off. You will also need a piece of a...

Most Hampton Bay ceiling fans come with light fixtures, in addition to the fan. If the bulb in your Hampton Bay ceiling fan has burned out (or you want to change it to an energy-efficient bulb)...

The light bulb broke in the ceiling fixture for whatever reason, and you can't touch it to get it out. What do you do? You use a potato of course. Whether you say po-tah-to or po-ta-to or spell...

If you have an old floor lamp, there's a chance that the wiring has become frayed or worn. Worn-out wiring can present the possibility of electric shock or can be a fire hazard. To replace...

There will always be things around the house that just need to be done. Often they are things that we are so accustomed to using that we don't even realize they need maintenance. That is until...

Most of us don't like to admit we sometimes do STUPID things. For example, we all locked our keys in our cars. Forgetting to feed our pets is a common mistake we sometimes make. However many times...

Can't find the toolbox... or maybe.. just like tons of other people, your tools grew legs and walked away.. You can easily get that broken light bulb unscrewed from its socket hassle free using a...

This article will show you the steps necessary to replace a Quartz Halogen Bulb

Learn to take a broken bulb from socket without cuts or electrocution...

MAKE SURE THE SWITCH IS OFF FIRST!!!!

I have used raw potatoe halves to remove broken light bulbs from their electrical socket, but what if the bulb, particularly a recessed bulb, has been in the socket for so long that it actually...

This article will teach you how to change a broken light bulb out of a socket without any fancy tools.

Outdoor lighting sold at home improvement stores sometimes comes with extras like sensors that pick up motion or turn on the lights at dusk. These built-in sensors save you the trouble of...

That old light socket just doesn’t work any more. It clashes with your decor, and it’s time for a new one. You just saw the perfect one in a lighting store and decided you must have...

It's a well-known fact that fluorescent lighting is cost effective and cheaper to operate than incandescent bulbs. Unfortunately, fluorescent lighting is prone to hum or buzz when it is about to...

The kids finally kicked a field goal. The only problem is the field goal was in your living room. The goal just so happened to be a light bulb now shattered in its socket. What's one to do?

You will be able to finally sort out the controversy and make an informed decision.