eHow launches Android app: Get the best of eHow on the go.

Carpentry

Sort by:
Best Match
Most Popular
Newest

Showing 1-23 of 23 results

  • How to Level an Interior Door Jamb

    The jamb surrounds the door and holds the door in place, hence the necessity for it to be level, so that the door opens and closes freely. You should make sure that a jamb's physical integrity is...

  • How to Level a Door Jamb

    Leveling a door jamb is necessary for the door to function properly. An out-of-level door jamb forces a door to "stick" when closed, stops the door from closing all the way or latching, and can...

  • How to Shim an Exterior Window Trim

    Most often the structure and framing of a house is not perfectly square. For this reason, it is often necessary to adjust trim elements to conform to subtle irregularities by inserting shims....

  • How to Repair Sagging Cabinets

    Sagging cabinets are a sign that somethings has gone wrong. There are different reasons why cabinets sag. It is primarily due to improper installation, weak screws, or cabinet flaws. Whatever the...

  • How to Do Wall Trim Work

    Wall trim can add visual interest and professional polish to a room. Baseboards, crown molding and chair rails are all options to dress up your room. Doing it yourself takes some patience and...

  • How to Hang New Sheetrock Around a Shower Unit

    Installing sheetrock around a shower unit is a simple task, but there are a few steps to advance your work to a professional level. It is important to shim the transition from the nailing flange...

  • DIY How Do You Level a Tub & Shower Stall

    It is important to level a tub and shower stall. When not level, a tub and shower unit may not go together properly which could result in large gaps to caulk. It also causes problems when...

  • How to Install Exterior Metal Doors

    Metal doors are popular because of the many styles and because they are energy efficient. When you decide to replace your door, replace the jamb also. Replacing a door without replacing the jamb...

  • Carpentry Trim Tips

    Installing trim work is very rewarding. Looking at the finished product brings a sense of satisfaction for a job well done. Though usually not extremely difficult, there is a level of skill...

  • How to Level a Particle Board Subfloor

    A particle board subfloor may have one or more spots where there are detectable dips, wells or undulations. Subfloor is intended to be covered with padding and carpet, or overlaid with finished...

  • How to Install a Milgard Window

    Milgard windows are vinyl replacement units that are fairly easy to install. The key to window installation is ensuring that the window opening is properly prepared to accept the window. It is a...

  • Do it Yourself: Window Installation

    Installing windows is not an overly difficult process. With some basic carpentry skills and a little knowledge, it is a fairly simple do-it-yourself project. Being prepared is the key to...

  • How to Install New Windows in Concrete Block

    Installing windows in a concrete block opening presents a small challenge. The primary problem is that it is difficult to anchor the window to the block. With a little forethought and preparation,...

  • How to Install Vinyl Windows in New Concrete Block Construction

    Installing vinyl windows into a block house, as this guide will show, does not have to be difficult. Some specific preparations to the window opening can make the job much easier and leave the...

  • How to Install Windows in Concrete Block Houses

    Installing windows into a block house does not have to be difficult. Some preparations to the window opening can make the job much easier and leave the window prepared for interior and exterior...

  • How to Install Windows in New Construction

    Windows play an integral part in new construction, as they allow air and light into a home or building. For this reason, local building codes often specify the minimum glass and venting area...

  • How To Install an Exterior Window

    There are many window types on the market. You should select a window that harmonizes with the general design of your house, and one that adds to the style and decor of your home. Some windows...

  • How to Do Your Own Vinyl Window Installation

    Installing a vinyl window is a task that you can accomplish with some basic carpentry skills. Vinyl windows are excellent for their energy efficiency and have improved over the years. Even if you...

  • How to Build & Install an Exterior Door Jamb

    Building a doorjamb is a relatively easy project. You can purchase precut boards for this project, or you can purchase trim boards and cut them to size yourself. Some preformed exterior doorjamb...

  • How to Replace a Prehung Door

    Prehung doors come preassembled with the door jambs, the door, and all of the hardware intact. These doors can be used for interior installation as well as for exterior as long as the door is...

  • How to Install Pre-Hung French Doors

    One of the fastest and most affordable ways to update your home is to replace old aluminum sliders with new French doors. Made of wood and glass panels, French doors are known for bringing light,...

  • How to Install Cabinets onto Cement Block Walls

    Adding cabinets to concrete block garages can be accomplished by using toggle bolts. Toggle bolts come in a variety of sizes and shapes and are widely available. When purchasing toggle bolts,...

  • How to Install a Vanity

    You can install your own vanity

  • 1
  • 1

Copyright © 1999-2009 eHow, Inc. Use of this web site constitutes acceptance of the eHow Terms of Use and Privacy Policy.   en-US Portions of this page are modifications based on work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.

Demand Media