Carpentry

A variety of construction and carpentry jobs require you to tear down a wood structure. In the process, you will need to remove nails. You could do it with a hammer, but a better option is to use...

Need to cut a hinge mortise but don't have access to an electric router? Relax, people have been doing it with just a hammer and chisel for decades. A chisel can actually be less work than a...

Replacing support columns can be very dangerous work. Proper support must be supplied to the area being supported before the existing columns can be removed and replaced. Depending on the type of...

Anyone who has built more than one or two things in their lifetime has had the frustration of realizing that a carefully placed screw has turned just past the point of no return and is now loosely...

Replace door trim moulding when it becomes weathered due to natural elements, such as wind and rain, or when you want to update the look of your home. Door trim adds a decorative touch to your...

Ever wonder what to use for a mallet if you don't have one? Well, you can make an instant mallet and then convert the hammer back to a regular hammer. You not only save money, you save space in...

If you use your garage as "do-it-yourself" central, one of the best tools you can have is one of the simplest--a workbench. A solid work surface makes it easier to do whatever small or large...

A door jamb is the wooden trim inside the door opening. It is to the jamb that the door is attached. When you install flooring, you may find it necessary to cut the bottoms of the door jambs so as...

Sometimes, you cannot nail straight on into a joint because of how it is positioned. When this happens, you can toe-nail instead to affix the two pieces of wood together. This practical measure...

Sometimes, when hammering a nail, you may nail it in the wrong spot or bend it (from not hitting it straight). When this happens, you often will need to remove the nail from the wood and try...

Hammer drills are equipped with a special feature that allows a drill bit to move back and forth in quick recessions while the bit spins. This hammering drives the bit into the hard surface while...

Removing concrete nails can be a frustrating task. There are two types of nails that can be hard to remove: the concrete nail and the masonry nail. Concrete nails are heavy-duty, rigid and...

Kitchen sink shelving is ideal for storing cleaners and other household items. The shelves can be constructed of several types of materials; wood is the most common while metal and plastic are...

Most doors are installed in homes pre-hung. Pre-hung doors come assembled, complete with the door, jambs, hinges and threshold. You can replace the threshold of a pre-hung door using a...

Stair risers can take a beating over time. When wear and tear starts to show, you may need to replace them. When replacing risers, consider replacing the treads, as they will most likely be...

Although carpentry tools number in the hundreds, there are five tools that are absolutely necessary for basic carpentry.The following article will discuss the history, significance and use of each...

A hammer drill is similar to a regular drill with some added features. They are more heavy duty and have more horsepower. For this reason, they are used for bigger jobs that require drilling into...

Getting concrete on anchor bolts can cause problems at any job site. Hitting the anchor bolts with a hammer and scrubbing the anchor bolt with a metal brush will remove most if not all dried...

After swinging a hammer over a million times in my life I can tell you that it does matter on the size of the hammer. Here are some tips that can help you choose the right hammer for you.

If you have a door that opens by it self, there is a simple fix. The doors swings open because the wall or door was installed out of plumb.

Are you tired of smashing your fingers while trying to hammer nails? This handy solution makes it easy to avoid the risk, particularly when hammering nails into tight corners and other areas where...

Pulling 16 D nails out of a 2x4 when they are driven into the lumber is sometimes difficult to do if you only have a hammer. I’ve seen guys use two hammers using the claws of one hammer positioned...

Banging your fingers while hammering nails can be extremely painful. With any do-it-yourself project, it is important to make sure that you have the right tools and safety equipment. There are...

If you're handy with a hammer and a leveler, installing an exterior door is easier than you'd think. It helps if the pre-existing door has been taken down, allowing you the freedom to just step in...

Toenailing a board allows you to strengthen the joint of two boards that form a 90 degree angle. You can use this technique to get stubborn or bowed boards to align properly. With a little...

Removal of nails can sometimes be tricky, especially if you want to make certain the wood remains undamaged. Fear not; there's a few tricks you can pull out your tool belt. This eHow will show you...

For carpentry jobs that require a lot of stapling, consider using a staple hammer rather than a hand-held staple gun. This tool is more user-friendly because you don't have to squeeze a trigger....

Although hammering a nail sounds simple, it takes a bit of practice to pound a nail correctly so that it doesn't bend or lean over. You want it to go in right the first time so you don't have to...