eHow launches Android app: Get the best of eHow on the go.

Exterior Aftermarket Options

Sort by:
Best Match
Most Popular
Newest

Showing 1-25 of 25 results

  • How to Install Splash Guards on a Silverado

    A splash guard, when installed on your truck, will help to prevent water, dirt and mud from running up the side of the vehicle. It helps prevent splashing on the vehicle behind you, and it's...

  • How to Install Jeep Wrangler Nerf Bars

    Jeep Wranglers are already fierce-looking vehicles, but with nerf bars the Jeeps can become that much more stylish. You can install these step bars with a few tools and supplies. Installing nerf...

  • Hitch Installation Instructions for a Jeep

    Adding a trailer hitch to your Jeep will increase its capabilities. With a trailer hitch, you will be able to haul cargo on a flat trailer, tow a boat or provide a place to attach a cargo holder....

  • How to Install a Nissan Xterra Front Plate Holder

    Over half the states in the U.S. require a front and a rear license plate, however, because some states don't require front plates, auto manufacturers do not install the front plate brackets at...

  • How to Lower a Truck Using U Bolts

    Lowering a truck or a car that has a leaf spring suspension isn't uncommon and can be done in your own garage in a few hours. To do this, use longer u-bolts and lowering block. A u-bolt is a...

  • What Type of Bolts Are Used for a Hitch?

    Hitches can be attached to your vehicle aftermarket to give you the ability to move loads or tow cars. Installing the right bolts allows you to safely secure your weight load to your vehicle.

  • How to Remove the Spoiler From a Hyundai Coupe

    The spoiler on the Hyundai coupe is installed by drilling holes into the trunk lid, and then securing the spoiler with adhesive and heavy-duty bolts. Removing a spoiler is much simpler than...

  • How to Lift Your Truck

    Lifting a truck 3 inches using a suspension lift requires changing the front springs and shock absorbers in the front and installing shocks and a block in the rear. The kits differ according to...

  • Installing a CJ5 Body Lift

    The Jeep should be parked on a flat, level concrete surface. Many vehicles do not rest perfectly level. Jeeps that are not level at the start of installation will continue to be off-angle once the...

  • How to Install an OEM Aero Kit in a 2003 Honda Accord

    Many drivers seek a way to improve the look of their vehicles. One of the most effective ways of doing so is to purchase an Aero Kit, which will give your car a bolder, more aggressive look as...

  • How to install a trailer hitch on a Toyota Camry

    Today, I will be installing a trailer hitch on a Toyota Camry. If your car doesn’t have a trailer wiring harness, you should consider installing one along with the hitch. So let’s get started,...

  • How to install a trailer hitch in a Dodge Grand Caravan

    So you want your Dodge Grand Caravan to have the ability to tow a trailer? Well then you need a trailer hitch. So let’s get started, just follow the steps below to continue.

  • How to Mount a Winch

    Mounting a winch onto the front of your off-road or recovery vehicle is an extremely effective method of extracting a vehicle that is stuck. The general rule states to install a winch that can...

  • How to Install Lowering Blocks on an S10

    S-10s are no longer being made by Chevrolet, but are still very popular with the after-maket and custom truck crowd. Most S-10s that are modified are lowered close to the ground. The best way to...

  • How to install a T-rex Billet grille

    The t-rex Billet grille gives your vehicle that sporty look. It makes your vehicle look better. Once the project is done, you will be satisfied. So let’s get started. Just follow the steps below...

  • How to Fish Bolts for Trailer Hitch Installation

    It often seems like car and truck makers have conspired to make it difficult or impossible to install a trailer hitch. Custom fit hitches from companies such as Draw-Tite and Valley make it a lot...

  • How to Put Ground Effects Kits on Cars

    Many exterior aftermarket upgrades involve at least some paint and bodywork to make it noticeable. Ground effects can make a difference in the appearance of your car, painted or not. Most people...

  • How to Drop a Chevy Truck

    A dropped or lowered truck is almost the opposite of the raised monster trucks. A dropped or lowered Chevy truck sits low to the ground. The Chevy truck can range from being a few inches lower...

  • How to Install Nerf Bars

    There are many additions you can add to your truck, some for extra flair and some for functionality. An addition to your truck that will add some flash as well as make getting into and out of your...

  • How to Install a Body Lift

    One of the cheapest and easiest ways to lift a truck or jeep in the air is to buy a body lift kit. Installing it, though, can seem more daunting than it needs to. It can be done in just a few...

  • How to Replace Bolts in a Harley Dyna Front Motor Mount

    Harley Davidson Dyna engines are 96 cubic-inch engines that are fuel-injected and fuel-efficient with an electric ignition. The Dyna comes on a whole family of Harleys including the Street Bob,...

  • How to Install Custom ATV Winch Bumpers

    As formidable as ATVs are, sometimes that mudhole you just drove into or the creek crossing you are about to fjord just demands a bit more muscle. That muscle is often provided by some sort of...

  • How to Install Vance & Hines True Dual Exhaust

    Vance and Hines makes some of the finest aftermarket parts for Harley Davidsons and other custom motorcycles. Established in 1979, Vance and Hines manufactures exhaust and air intake systems for...

  • How to Put a Body Lift On a Truck

    A body lift can give a truck better ground clearance. This could be advantageous if you have to drive on jagged or uneven roads. A lift also allows you to put larger tires on the truck for better...

  • How to Install a Car Exhaust System

    The purpose of a muffler is to reduce toxic emissions and noise. The parts of a muffler are the backbox and the tailpipes. The noise of a car muffled by a muffler comes from pressure waves from...

  • 1
  • 1

Copyright © 1999-2009 eHow, Inc. Use of this web site constitutes acceptance of the eHow Terms of Use and Privacy Policy.   en-US Portions of this page are modifications based on work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.

Demand Media