Rock Climbing

When you fall while rock climbing, tremendous forces are exerted on your body through the climbing rope tied to your harness. A properly fitted harness will help dissipate these forces in a way...

A rappelling harness can be made out of rope or tubular webbing in an emergency by forming three loops use as a waist belt and two leg loops. Fasten a makeshift rappelling harness with helpful...

Butterfly coiling a rope is a quick and efficient way of keeping the rope manageable, and it eliminates the need to carry a bag to and from the climb, a desirable feature when a backpack would be...

The Figure eight with double loops, usually referred to as figure eight bunny ears, is commonly used for tying small Y-hang anchors for rappel lines or creating two loops at the end of a haul line.

The most important piece of rock climbing gear is the harness, which should fit comfortably and be very secure. Learn how to use all of the loops and tie points of a rock climbing harness with...

The best method of tying a climbing harness is by making two-leg loops in the webbing with overhand knots and finishing it off with a water knot. Clip leg loops with a carabiner after tying the...

A rock climbing harness is an essential piece of equipment in the sport of rock climbing. It is the device that holds the climber securely around the hips and attaches the climber to the climbing...

One of the most important pieces of equipment for rock climbing is the harness. Climbing harnesses, also called “sit harnesses,” have two key components–a waist belt and leg...

All harnesses are not created equal. Consulting with an experienced climber or a sales representative who knows the ins and outs of a particular harness will help you decide which harness to...

The triple bowline knot ties three loops with one knot. It is a more difficult variant of the more traditional bowline knot. Used in rock climbing and boating, the triple bowline knot is a staple...