Stamped Concrete Problems

Save

Stamping is a unique finishing technique for concrete that gives personality to what might otherwise be a a plain patio, porch or other surface. You can do as little or as much stamping as you like, from creating just a border design to a complete faux-tiling job. There are some problems that may arise when stamping concrete, including the concrete being either too wet or dry to use.

Cured Concrete

  • Stamping is a finish that can only be applied to concrete that is still slightly damp. Yet many homeowners purchase a home with a concrete surface that they would like to stamp that is already completely finished and was cured, or dried, long beforehand. A thin surface coat of new concrete, often called a skim coat, can be applied to the surface of the old concrete. The new concrete may then be stamped to give the old concrete a new look.

Wet Concrete

  • Just as concrete can be too dry to stamp, it can also be too wet. Many inexperienced homeowners attempt to stamp concrete just after it is poured and leveled. The surface of the concrete must be worked with a trowel to release as much moisture as possible, preventing this water from being trapped in the center and allowing it to evaporate. The concrete must then sit for approximately three hours, giving it time to "set up". You should test the concrete by poking it with a finger. If the hole remains and does not fill itself, the concrete is ready to be smoothed a final time and stamped.

Improper Stamps

  • Ordinary craft stamps are available everywhere from supermarts to specialized hobby stores. A homeowner who has not properly researched concrete stamping may grab some of these stamps without thinking twice. But they will not work, and using them will yield a disappointing result. Concrete stamps are much different from regular stamps. They are generally larger and the design face is much deeper. Concrete stamps can be found at most home improvement stores.

Improper Technique

  • Most people have played with craft stamps, ink and paper. This type of stamping is hard to do incorrectly and hardly requires consideration of technique. For this reason, a homeowner may jump into concrete stamping head-first, using the same procedure that they would utilize to stamp paper. However, it is important to lower concrete stamps straight down and lift them very straight and evenly. And, in opposition to the firm pressure that paper stamping requires, concrete stamping calls for quite a light hand.

Lack of Sealer

  • No matter what finish is chosen, completed concrete surfaces must be sealed with concrete or masonry sealer. This protects the concrete from cracks, crumbling, and other damage and also ensures that all of your hard work does not go to waste.

Related Searches

References

  • Photo Credit stamped brick image by PeteG from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • Brick Driveway vs. Concrete

    Homeowners usually want their driveway to look nice, be reasonably priced, require little maintenance, and withstand many types of weather. Concrete provides...

  • Concrete Sealer Problems

    Concrete sealers are vital in protecting the appearance and longevity of concrete, in both interior and exterior applications. They also aid in...

  • How to Seal New Concrete

    The final step of installing new concrete is to seal it. Concrete sealant adds a surface luster that enhances overall appearance and...

  • How to Fix a Crumbling Concrete Driveway

    The concrete driveway to your home takes a lot of abuse. It's exposed to the elements every day. The concrete will crack...

  • How to Change the Color of Stamped Concrete

    Applying different types of stains, tints or dyes can change the color of stamped concrete. For minor color adjustment, use an impregnating...

  • Stamped Concrete Pros and Cons

    Many homeowners use concrete as a surfacing material for driveways, walkways, patios, floors and other applications because of its durability, but its...

  • Problems With Concrete Overlays

    Concrete overlays are finishes that cover up concrete slabs. People install these overlays for different reasons--sometimes they are necessary, as a repair...

  • How to Repair Stamped Concrete

    Stamped concrete can be repaired using a polymer modified concrete slurry to fill in the damaged spaces. Re-stain and seal a repaired...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!