Pond Scum Treatment


As the summer months drag in warmer temperatures lakes and ponds come to life as biological processes speed up and allow for myriad plants and aquatic life to flourish, sometimes to the pond owner's detriment. Pond scum, more commonly known as pond algae, can easily get out of control and cover a pond unless prevention and treatment plans are in place.

Physical Removal

  • The most effective way to treat and remove pond scum is to mechanically take it out of the pond with a net or pond rake. By removing the clumps of algae, as opposed to killing them letting them decompose in the pond, you prevent any re-release of nutrients that would otherwise fuel a future algae bloom. Simple dip nets and durable rakes with 3 to 5 inch teeth work well to pull out algae. It is also key to discard the detritus away from the pond. If left on the shoreline, the algae would decompose and rain would wash the nutrients right back into the pond.

Copper-Based Algaecides

  • Chelated copper is the most common active ingredient in algaecides available to consumers and lake managers alike because of its effectiveness in eliminating all varieties of pond scum. Typically found in liquid form, a water diluted mixture is made in a backpack sprayer or hand sprayer and then applied evenly over the surface of the pond scum. Copper-based chemicals must NEVER be used in the presence of any minnows, trout, or carp species, including koi and grass carp.

N on-Copper-Based Algaecides

  • For those ponds that do harbor the aforementioned fish, there are alternative chemicals that use a sodium carbonate peroxyhydrate active ingredient that is non-toxic to any aquatic life. Most readily available in a granular form, gloves and scatter box are used to evenly distribute the granules over top of the pond scum bloom. Similar to the fizzing action that occurs when baking soda comes in contact with water, so to will these types of algaecides bubble within 60 seconds of contact with pond scum.

Phosphorus Binding

  • Phosphorus is the primary nutrient pond scum needs to thrive- if it is unavailable the algae doesn't ever have the chance to form. Phosphorus removal products are used as preventatives to bind and render the nutrient unavailable. Aluminum sulfate is the most common form of phosphorus binding products.

Pond Dye

  • Pond dyes are another preventative method that should be used before a bloom occurs. By coloring the pond water blue or black, less sunlight is allowed to penetrate the water column thus decreasing the ability for pond scum to carry out photosynthesis, or the primary method by which all plants generate energy.

Related Searches


  • Photo Credit grenouille verte 03 image by Luc PATUREAU from Fotolia.com Forellen image by Yvonne Bogdanski from Fotolia.com
Promoted By Zergnet


You May Also Like

  • Copper Sulfate Pond Treatment

    When organisms such as algae become a problem in private or commercial fish ponds, copper sulfate treatment provides an inexpensive solution. However,...

  • How to Clean a Small Outdoor Pond

    Keeping an outdoor pond clean and the water clear might be easier than you think. And you don't have to keep emptying...

  • How to Treat Pond Algae

    Treating pond algae is not nearly as difficult as you may believe and does not require the use of potentially harmful chemicals....

  • How to Kill Pond Scum

    Algae, or pond scum, are comparable to weeds in a garden. They serve no purpose, are unattractive and are hard to remove....

  • How to Remove Scum From a Boat Hull

    The more time that a boat spends in water, the dirtier the hull will get. Lakes, rivers, ponds and other water resources...

  • What Causes Scum in Ponds?

    Pond scum is a type of blue-green algae that is highly visible during hot spring and summer months on the pond's surface...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!