Bathtubs Made From Cow Troughs

Save

Both bathtubs and cow troughs, often referred to as livestock water tanks, are designed to hold water. A bathtub made from a metal or wood livestock water tank would add a western flair to the décor of any bathroom. The livestock tanks are occasionally used for a hot soaking tub.

Advantages

  • The livestock water trough will likely be more economical than a bathtub. Metal or wood livestock tanks have a rustic look which may fit with the décor of a ranch bunkhouse type bathroom. You can also use the tanks outdoors to create a bathing opportunity under the sky.

Disadvantages

  • The wood or metal livestock tanks do not come equipped with bottom drains. There is also no slope to the bottom of the tank to allow complete drainage of the tank if you add a bottom drain. The sides of most stock tanks are higher than a bathtub, which can make entering or exiting the tub more difficult and even dangerous.

Plumbing

  • You can mount the tub's water faucets on the wall above the livestock water tank. You can mount a drain in the floor of the tank with a compression fitting and plug the drain during use with a rubber stopper. You can fill outdoor bathtubs with water hoses connected to faucets in the home and drain them on the ground.

Plastic Water Tanks

  • Plastic livestock water tanks do not have the romance of a wood or metal tank but do offer better insulation and will keep hot water warmer for a longer period of time. They also do not have the corrosion issues sometimes associated with a metal water tank.

Cowboy Hot Tubs

  • Livestock tanks are commonly used along with a propane or wood fired heater to create what is sometimes referred to as a cowboy hot tub. These tubs do not offer any pumps to circulate the water and create the spa type effect, but do offer a heated water soak for a more economical cost than a standard hot tub.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!