Exhaust Brake Vs. Jake Brake

Save

Engine brakes, which include both exhaust brakes (EBs) and Jacobs ("Jake") brakes, have been around for nearly as long as road-going diesels themselves. Often confused for one another, EBs and Jakes function by related but functionally opposite principles: to slow the vehicle by causing the engine to produce "negative" power.

Purpose

  • Diesel engines don't use a spark to ignite the fuel mixture; instead, they simply squeeze the air/fuel mixture until it explodes with heat and pressure. This "compression ignition" strategy means that a diesel can produce nearly as much negative power (resistance to forward movement) as they can regular power by harnessing the power of compressed air or the equivalent amount of vacuum trapped in the cylinders.

Exhaust Brake Function

  • An exhaust brake is simply a large butterfly valve in the engine's exhaust stream. When closed, the exhaust brake traps a great deal of the engine's air inside the cylinders. The engine continues to function as it normally would, but gets only enough fuel to idle. The exploding fuel's gases have nowhere to go when the valve is closed, so they push back against the piston and inhibit engine rotation. A really efficient exhaust brake on the right engine can resist truck acceleration with about 80 percent of the engine's maximum power output.

Jake Brake Function

  • In terms of function, Jake brakes and exhaust brakes are exact opposites. Whereas an exhaust brake traps compressed air inside the cylinders (inhibiting upward piston movement), a Jake creates a vacuum to inhibit downward piston movement. A Jake brake is essentially a solenoid that causes the exhaust valve to open early (while the piston is still traveling upward); all of the air gets pushed out, leaving a powerful vacuum behind. A Jake brake is integral to the engine; it comprises a big part of the valvetrain, so you can't just add one on like you would an exhaust brake. A Jake brake can produce negative power to upwards of 90 percent the engine's max power.

Drawbacks

  • Although Jake brakes are powerful, they're not without their problems. The first is that the design is noisy; if you've ever heard a machinegun-like clatter echoing through a mountain valley then you've experienced the Jake brake's signature howl. Jake brakes have actually been known to trigger avalanches in some snowy mountain passes, so they're often restricted during the winter. Both Jake brakes and exhaust brakes can cause overheating, but the exhaust brake (which traps most of the exhaust's heat inside the turbo and engine) is far more prone to causing thermally-induced destruction than the Jake.

Use

  • Modern trucks often use a Jake brake and exhaust brake in tandem. Although the exhaust brake does help to supplement the Jake, it's used more to quiet the truck than anything else. That's why modern diesels using an engine break tend to exhibit more of a loud purr or growl than the typical Jake brake rattle.

References

  • Photo Credit line of trucks 1 image by Aaron Kohr from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • Exhaust Brake Problems

    Exhaust Brakes (a.k.a. Jake or Jacobs brakes) are one proven way of reducing brake wear on heavy trucks, and increasing downhill safety....

  • How Do Brake Retarders Work?

    A brake retarder uses pressure created within the engine to lessen the speed of a vehicle. While most commonly used in commercial...

  • How Does a Diesel-Engine Brake Work?

    If you've ever heard the constant, machine-gun like chatter that echoes through the mountains in some areas of heavy traffic, you have...

  • What Is a Jake Brake?

    The Jacobs Engine Brake, or Jake Brake, is an add-on engine-braking system for tractor-trailers. Jacobs Company sells the compression-release engine brake, which...

  • How to Use a Semi Truck Jake Brake

    The Jacobs Engine Brake (sometimes known as a Jake Brake) is used mainly in large vehicles with diesel engines. The Jake Brake...

  • How to Use a Jake Brake

    The Jacobs engine brake, more commonly known as a Jake brake, is a device that retards the valve timing on a diesel...

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!