Deionized water is a highly purified form of water in which all ions have been removed through a process called "ion exchange." Ions that the deionization process removes include calcium, chlorides, and sodium. Deionized water can be used in the home to ensure that only the purest water is being utilized by one's family, however deionized water also has a large range of commercial and industrial applications.
Positively charged ions, called anions, are exchanged for hydrogen and hydroxyl. Most water deionizers are filled with a resin that bonds with all other types of ions and removes them from the water, leaving only the hydrogen and hydroxyl ions behind. The other ions are physically displaced by concentrated acid and caustic within the resin bed and are subsequently stripped away.
Testing Deionized Water
Due to the enormous variety of deionizers available, the level of water quality one can expect to get from a deionizer also varies. The most effective way to determine the quality of purified water is by performing a resistivity & conductivity test. Deionized water should have a resistivity of 18.2 million ohm-cm (18.2 mega-ohm) and a conductivity of 0.055 microsiemens. The amount of electrical conductivity of deionized water is determined by the amount of ionized particles present in the water. Resistivity and conductivity are simply a means of measuring this amount.
Instruments for testing the quality of deionized water can be either potable or installed in line with direct water flow. Portable testers are recommended for on-site work, however they are generally not as accurate as in line testers and should only be used where proper water deionization is not absolutely critical.
In line testing equipment automatically monitors all water coming through the line and should be installed so that the water reaches the tester after it passes through the deionizer's filter. In line testers are more accurate due to the fact that deionized water, once it leaves the pipe, will collect carbon dioxide from the air. Carbon dioxide will effect resistivity testing results and thus may provide corrupted data.
There are four main kinds of deionizers: disposable cartridges, portable exchange tanks, automatic units, and continuous units. There are two-bed systems and mixed-bed systems, with mixed-bed being being more effective in most applications.
Several industries rely heavily on purified water. Among these are health care, laboratory, pharmaceutical, cosmetics, electronics, food processing and car washing.
- Photo Credit faucet image by Laura Dynan from Fotolia.com
What Is the pH of D.I. water?
D.I. water is deionized water, or demineralized water. It is essentially water without the minerals, or as close to no minerals as...
Conductivity and Water
Conductivity is typically mentioned in relation to electricity. Water has the ability to pass electrical currents, and conductivity is a measurement of...
How to Test Water Purity
The average person uses 72.5 gallons of water a day. But is that water safe? Water testing is expensive, so make sure...
How to Deionize Water
Deionized water is generally an effective solvent and will dissolve many compounds. These substances frequently break up into charged atoms called ions,...
How to Measure Conductivity in Water
Conductivity is a measure of how well a material conducts electricity. In water, electricity is conducted by the available ions, or electrolytes,...