Pipe Dope Vs. Teflon Tape

Save

Whenever a job requires making a connection between two threaded ends of a pipe, the possibility of leaking exists. It doesn’t matter what kind of pipe it is; from plastic to steel gas line, threads are imperfect and will leak if not protected with additional material placed on the threads. There are two basic types of material that stop leaks: Teflon tape and pipe dope.

Pipe Dope

  • Pipe dope is a chemical sealant with a texture similar to a thick paste. It is made to stand up against the types of fluids it contacts. It can be purchased at any hardware store and comes in cans of various sizes with applicator brushes or can be bought in a tube. It is advertised not only to seal, but to lubricate joints, making unthreading an easy task.

Teflon Tape

  • Also called plumber’s tape, Teflon tape comes spooled onto rolls much like adhesive tape. Like pipe dope, it is designed to seal threaded joints against leakage, but it’s a stretchy film that can be wrapped around threads. It is normally white in color but can also be color-coded to denote what the pipe is carrying. Green tape seals oxygen-carrying lines, yellow seals gas lines and pink and white are for water lines; pink tape is higher-density and more durable than white tape.

Water Connections

  • Most homeowners have a roll of Teflon tape in their junk drawer, or tucked away in their tool box, as this tape works great for almost all residential applications. From plastic water pipe connections under your sink, to the threaded fitting in your lawn sprinkler system to the hose lines on the air compressor sitting in your garage, Teflon tape does the job very well.

Natural Gas Lines

  • If your home has a gas dryer, stove, water heater or furnace, you will have heavy steel pipes within your walls that carry natural gas. Natural gas is highly explosive and dangerous, therefore, the threaded connections must not leak. Strict building codes enforced by local inspectors require the completed gas piping to be pressurized with air and gauged for at least twenty four hours to make certain there are no leaks. According to most building codes, either type tape of the yellow-colored can be used for gas connections; however, most plumbers, as well as inspectors, prefer pipe dope because it is thicker and usually seals better.

Which to Use

  • For water lines, drains, air compressors and faucets, Teflon tape works very well, as long as it’s installed properly by wrapping the threads in the direction they will turn while joining. It’s clean, non-messy and simple to use. Pipe dope, on the other hand, is messy, but it’s been around longer, and some states require it for natural gas lines inside the home. Both of these products work well, so it’s a question of what you are using it for to determine which is better.

References

  • Photo Credit zoran simin/iStock/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • How to Wrap a Pipe With Teflon Tape

    Teflon tape is a delicate white strip of filmy material that's used to wrap plumbing pipe ends before screwing on the fittings...

  • How to Seal a PVC Pipe

    PVC (Polyvinyl Chloride) pipes need just as much reinforcement and maintenance as galvanized piping. Sealing PVC pipe threads prevents friction, leakage, and...

  • Joining Black Iron Pipe

    Black iron pipe, most commonly used for gas piping, comes in 3/8 inch, ½ inch, and ¾ inch diameters. Larger sizes are...

  • How to Stop a Gasoline Leak With Teflon Tape

    Teflon tape is a cheap and effective way to seal fittings in gasoline lines. It is a safe remedy because Teflon tape...

  • How to Remove Pipe Joint Compound

    Pipe joint compound--known as threading compound or pipe dope--is applied around the threads of steel gas pipe sections before they are joined...

  • How to Cap a Gas Line in My House

    Most gas lines used in homes are composed of black steel or iron, also called black pipe. When there is a gas...

  • Can You Use Teflon Tape on Gas Pipe Fittings?

    When connecting gas pipelines and their fittings to a stove, grill or other connection, it is important to use Teflon tape designed...

  • Natural Gas Plumbing Pipe Types

    Black metal pipe is no longer the only distribution material for natural gas. Many municipalities allow builders to install alternative gas plumbing...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!