Devices Used to Remove Pollutants From Smoke Stacks


Efforts to reduce global warming are putting emphasis on technologies that decrease carbon dioxide emissions. Smoke stacks are a significant source of pollutants that include carbon dioxide emissions. There are various technologies that can be used to remove pollutants from smoke stack emissions, all of which capture pollutants before they are emitted through the stack. The type of technology employed depends upon the facility's processes and design.

Removing Pollutants from Smoke Stacks

  • Technologies to remove pollutants from smoke stacks are designed with consideration of the size of pollutants to be removed, emission flow rate, temperature, moisture, and chemical properties like flammability and acidity. The choice of technologies includes electrostatic precipitators, fabric filters, venturi scrubbers, cyclones and settling chambers.

Electrostatic Precipitators

  • Electrostatic precipitators use magnetic attraction to draw smaller sized pollutants out of the emissions stream. The emission gases pass through a specially designed chamber that first charges the pollutants, which causes them to be magnetically drawn to specially charged plates where they are then collected in hoppers. The emission stream exiting the chamber is about 99 percent clean of small pollutants.

Fabric Filters

  • Fabric filters, also referred to as baghouses, remove pollutants as the emission stream passes through porous fabric specially designed to remove fine particles. The fabric must be able to withstand high temperatures and corrosive chemical characteristics. Often emissions at high temperatures must be cooled before entering the baghouse.

Venturi Scrubbers

  • Venturi scrubbers mix water into the emission gas in specially designed tubes. First, velocity and pressure are increased to combine the pollutant particulates with the water, then mixing processes are stopped and the pollutant particulates/water droplets settle out of the gas stream as it exits the tube. This technology uses a lot of water and creates waste water that must be treated.


  • Cyclones are machines that mimic a natural cyclones motion to force larger sized pollution particles to fall to a hopper in the bottom and clean emissions gases to exit out the top. Cyclones are a cost efficient and low maintenance method to removing pollutants from smoke stack emissions; however, they are only suitable for larger sized particles.

Settling Chambers

  • Settling chambers remove large particles of pollutants from emissions. The velocity of gaseous emissions is slowed down as it moves through the chamber whereby larger sized particles drop out into a hopper. Settling chambers are most often used in conjunction with other technologies because smaller sized pollutants likely remain in the emissions that exit the chamber.

Air Quality

  • Devices used to control smoke stack emissions are part of a plan to improve air quality. The plan sets forth goals with specific air pollutant standards. Technologies that remove pollutants from smoke stakes are determined to achieve reductions. After implementation of these technologies, emission levels are evaluated to see if air quality goals have been met. If not, more pollutant reductions are required.

Related Searches


  • Photo Credit Image by, courtesy of Foto43
Promoted By Zergnet


You May Also Like

  • How to Remove Pollutants From Smokestacks

    Smokestacks release particulates into the air---particles of soot, dust and smoke. These particles are large contributors to air pollution. Smokestacks are also...

  • How to Build Smoke Stacks

    A smoke stack is, essentially, a cylindrical chimney, used to expel smoke from a fireplace or boiler. It is iconic of the...

  • How to Build a Smoke Filter

    Smoking cigarettes is an expensive habit for millions of people around the world. The average cost of a cigarette pack is $5.50...

  • How to Remove the EGR Valve on Ford 6.0 Diesel

    An exhaust gas recirculation (EGR) valve is part of a vehicle's emissions control system, which regulates the amount of engine exhaust that...

  • Reducing Smoke From the Fireplace

    A wood-burning fireplace gives off heat through burning wood. When the burning process, or combustion, is not complete, the fireplace produces smoke....

  • What Are Smoke Stacks?

    Smoke stacks release exhaust that comes from various industrial processes within a factory or another type of facility. Smoke stacks mostly release...

Related Searches

Check It Out

Are You Really Getting A Deal From Discount Stores?

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!