A finish is vital for woodworking to protect your woodworking project from water damage. Some of the most commonly popular finishes on the market are varnishes and stains. A stain sinks deep into the wood to protect it from damage, while a varnish sits on the top of wood. Two of the most popular types of wood protection on the market are polyurethane varnish and tung oil stain.
True tung oil is derived by pressing the nut from the tung tree. It has been used for hundreds of years by the Chinese for finishing furniture and waterproofing ships. By contrast, Polyurethane is a polymer that was invented in 1937 by Otto Bayer as a replacement for rubber during WWII. It is used extensively in several media, including wood finishes.
Many of the products that are manufactured as tung oil on the market are not true tung oil. Instead they are a mixture of polyurethane and paint thinner that are manufactured under the name tung oil. Polyurethane/paint thinner mixtures that are manufactured as "tung oil" are distinguishable from true tung oil by their ingredient list. Tung oil that is not true tung oil is listed as having petroleum distillate added.
True tung oil soaks into the surface of wood. Once applied, it can take up to 48 hours to dry. It can take up to seven coats of tung oil to make a product truly waterproof, and true tung oil requires an additional coat yearly to maintain its finish.
Polyurethane varnishes sit on the surface of the wood. A coat of polyurethane can dry within 12 hours. It only takes two coats of polyurethane to be truly watertight.
Polyurethane must be brushed onto the wood with a paint sponge or brush, whereas tung oil may be wiped onto the wood using a cloth. Tung oil will bring out the natural grain of wood and does not coat the wood in a film the way that polyurethane does. This is why woodworkers who want to emphasize the grain of the wood choose tung oil. Using tung oil is often referred to as "making the wood pop."
Polyurethane is considered to be ideal for high-traffic areas such as wooden flooring. However, because of the thick patina that polyurethane leaves on surfaces, it is not considered to be ideal for intricate woodworking pieces such as scroll work on trim or furnishings. For projects such as these, tung oil is considered by some woodworkers to be a better finish because it soaks into wood.
- Photo Credit "Wooden Step and Shadow" is Copyrighted by Flickr user: shaire productions (Sherrie Thai) under the Creative Commons Attribution license.
Watco Danish Oil Vs. Tung Oil
Watco Danish Oil and tung oil are two types of wood-finishing oils with distinctly different properties. Watco Danish Oil is a brand...
Water-Based vs. Oil-Based Polyurethane
Polyurethane is tough, durable and ideal for high-traffic areas or furniture that receives lots of wear and tear. You have two types...
Spar Varnish Vs. Spar Urethane
Spar varnish and spar urethane are two very different compounds. The main difference between the two is spar varnish will eventually chip...
How to Refinish With Polyurethane Over Tung Oil
Some homeowners prefer painted or stained furniture and others enjoy letting the natural colors of the wood shine through. Leaving the wood...
How to Mix Tung Oil With Polyurethane
Tung oil is the derivative of the seeds from the tung tree. This oil has a natural yellow tone and has been...
How to Apply Linseed Oil to Polyurethane Finish
Linseed oil and polyurethane are both popular wood finishes. Linseed oil is pressed from flax seeds, while polyurethane is a petroleum-based product....
Can You Tung Oil Over Urethane?
Tung oil is an ancient form of wood sealant that comes from the oil of the tung tree. The tung tree originated...