What Do Line and Load Mean in Wiring?

Save

General Definition

When referring to an electric device that can be connected to another one, such as a receptacle, line refers to the wires feeding it from the panel, which is upstream from the device in terms of the flow of electricity. On the other hand, load refers to devices on the same circuit that are downstream of the one in question. A second meaning for load is the magnitude of the energy consumed by the devices on the circuit.

Multiple-Throw Switches

Distinguishing between line and load isn't always necessary. For example, a conventional wall switch -- which is a single-pole, single-throw switch -- works equally well whether you attach the live circuit wire -- line -- to the top brass terminal or the bottom because the switch has only two positions -- open or closed. The terminal connections are directional on a double-throw switch, on the other hand, because it can transfer power between different loads. The line and load terminals are clearly marked on such a switch, and the live circuit wire must always be connected to the line terminal.

GFI Outlets

Line and load terminals are also clearly marked on a ground fault interrupting outlet because the outlet contains a breaker that interrupts the current when it detects a current surge. Interchanging the line and load wires on a conventional outlet has no effect on the outlet, but doing so on a GFI outlet renders the breaker ineffective and creates a dangerous situation because the outlet won't give the protection it's designed to give. When daisy-chaining a pair of GFIs in a circuit, the load wires from the one upstream in the circuit must be connected to the line terminals of the one downstream, or the one downstream won't function properly.

Promoted By Zergnet

Comments

You May Also Like

  • What Is a 6 Wire Load Cell?

    A load cell is a transducer that converts force into an electrical signal -- usually measured in mV (millivolts) per V (volts)...

  • How to Install a Line Voltage Thermostat

    Line voltage thermostats control electrical power to heating and cooling devices. The two basic types of line voltage thermostats are single-pole and...

  • How to Wire a 220 Thermostat

    A 220-volt thermostat disconnects the power supply to a heater once the temperature reaches a set level. A 220-volt thermostat wires directly...

  • Wiring Instructions for an Intermatic Timer

    Intermatic Incorporated manufactures timer switches designed for indoor and outdoor use. Many pool pump motors and water heaters use Intermatic timers to...

  • How to Identify Hot & Neutral Electrical Wiring

    If you're working with electricity in your home wiring, learning how to identify what wires carry current is a life-saving skill. Household...

  • What Do the Colors of Wires Mean?

    The wiring in a typical residence can get complicated, and in an effort to keep track of what's what, electricians -- partly...

  • Problems With Wiring a GFCI

    The National Electrical Code (NEC) requires ground fault circuit interrupt (GFCI) outlets in new construction for countertop and exterior outlets, as well...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!