Hydrometer Calibration Procedures

Calibrate a Hydrometer
••• wkikmedia commons

A hydrometer is a device that measures the specific gravity of a liquid. They can’t be adjusted, so calibration consists of determining a correction factor to apply after taking the measurement. Hydrometers are sensitive instruments and their readings are significantly affected by minor changes in the environment, especially temperature.

Definitions

Specific gravity is the density of a substance relative to that of a reference material and may also be referred to as relative density. Typically, the reference material is water at four degrees Celsius, which has a density of approximately one gram per cubic centimeter (g/cm^3). In this case, the specific gravity of a substance is equal to the density of that substance in g/cm^3.

Theory

A hydrometer uses the principle of Archimedes to measure the specific gravity of a liquid. According to this principle, the weight of an object floating on a liquid will be equal to the weight of the liquid that it displaces. Since the weight of the hydrometer is fixed, the weight of the liquid it displaces is also fixed. A measured scale on the side of the hydrometer can therefore provide the specific gravity of the liquid.

Operation

A hydrometer is typically a long, narrow cylindrical object with a weighted bottom so that it will float upright. The hydrometer is placed in the liquid and spun so that any air bubbles are dislodged. Once there are no air bubbles clinging to the side of the hydrometer, the scale at the surface level of the liquid is read.

Temperature Correction Factor

The density of liquids will change as the temperature of the liquid changes. An accurate measurement of a liquid’s specific gravity will therefore require that its temperature be known. A commercial hydrometer will typically be accompanied by a chart that provides the correction factor to apply for a given temperature.

Verification

A hydrometer’s accuracy can be verified by measuring the specific gravity of liquids with a known temperature and composition. For example, a sample of pure water will have a specific gravity of approximately 0.998 at 20 degrees Celsius. The correction factor is calculated by subtracting the observed specific gravity from the predicted specific gravity. This correction will then be applied to any specific gravity measurements taken with the hydrometer.

Related Articles

Uses of a Hydrometer
How to Calibrate a Graduated Cylinder
What Is Specific Gravity?
How to Calibrate a Graduated Cylinder
How to Use a Durometer
How to Measure the Density of Liquids
How to Find the Mass of a Liquid
What Is the Specific Gravity of Water?
How to Calculate the Volume of a Powder Mixture
How to Convert API Gravity to Density
Tools Used to Measure the Volume of a Liquid
How Alcohol Thermometers Work
The Difference Between a Beaker & a Graduated Cylinder
Science Project: The Effects of Temperature on Liquids
How to Calculate Relative Accuracy
How to Calculate Degrees in the Baume Scale
How to Calculate the Density of a Mixture
The Five-Step Process for Finding Density
How to Convert Specific Gravity in Weight
How to Calibrate a Refractometer