House plants can flourish if given the proper care. One thing people overlook when caring for their plants is the type of water they give them. One very common mistake is giving your plants water that contains too much salt. This can negatively affect the growth of your plant and in the worst case, the plant could die.
Higher concentrations of salt in the water you feed to your plants can cause wilting, speckles on the leaves, dry leaf ends or even leaf drop and it will also affect the plant growth. The plant's pot will also begin to show a white crust around the edges.
The salt in the plant soil outside of the plant cells causes water to move outside of the cells to try to equalize the concentration. This occurs through the process of osmosis. The root cells die, and if the situation is bad enough, the plant will die.
The most common mistake that people make when watering their house plants is using the water that is filtered through their water softener. While the beads of resin in the water softener capture the calcium and magnesium salts in water as part of the process, sodium is then released into the water. This sodium is more harmful for your house plants than the calcium and magnesium that were in the hard water.
Another mistake people make is boiling the water to remove the salt before giving it to their plants. While this system may seem to make sense, in fact, much of the salt still remains after the water is boiled.
When you water your house plants, allow some water to drain through and then empty into the drip plate. Some water should drain through each time you water. If the drained water is absorbed back into the soil, the salts that were washed out are absorbed back into the soil. So it is very important to drain the water and not allow the pot to sit in the water. Be sure to get rid of the sitting water after it is drained.
The best solution for watering your house plants is to use rainwater or melted snow for watering your house plants. Collecting the rain in buckets and transferring it to old milk jugs, or any other container you have, works very well.
Reverse osmosis systems and deionizing systems will also work, but they are more costly. Leaching your plants every four to six months will also help remove any salt deposits. Leaching is done by pouring a lot of water on the soil and letting it drain completely. Keep the water running through the soil to wash the salts out.
How Do Plants Grow in Saltwater?
Saltwater usually harms plants and most plants cannot survive in these conditions, but some can. One of the main reasons why most...
The Effects of Tap Water on Plants
House plants need two basic things: water and light. The best water for your plants is free of impurities such as minerals...
The Effects of Salt Water on Plants
Salt water in low concentrations can harm a plant's health, while high concentrations can be fatal. Although scientific understanding of salt's biological...
What Happens When You Put Saltwater on Plants?
Experimenting with saltwater and land-based plants is a common science fair project. Plants, of course, need a constant source of water to...
Can You Water Plants With Salt Water?
High-sodium environments can be detrimental to the growth of many plants. Plants, like all living organisms, need a little salt, but intentionally...
Is Salt Water Good for Plants?
In high enough amounts, salt water is toxic and will kill most plants that do not naturally thrive in it, such as...
Does Soft Water Kill Plants & Grass?
Water softeners use salt to remove dissolved minerals from the water supply in homes. Normally, this "hard" water leaves mineral deposits on...
Why Does Salt Water Kill Plants?
Salt water can damage or kill sensitive plants, such as viburnums, yews and some maples. The use of rock salt as a...