- The most common use for a pumice stone is to soften rough, calloused feet. It exfoliates and eliminates dead skin on the bottom of your feet, especially on the heel. According to Livestrong.com, the friction the stone creates on the skin reveals the smooth layer of skin and cells underneath. This is beneficial for athletes or people who are on their feet most of the time, and it can be done regularly to maintain soft skin.
- A second use for pumice stones is splinter removal. If you regularly work with lumber or have children who get an occasional splinter from playing outdoors, a pumice stone can be used to remove these miniscule pieces of wood. According to ChildCareResourcesInc.com, if you soak the skin in a warm bath, the skin's pores will open up, making it easier to remove deep splinters. Take a pumice stone and gently rub the area in a circular motion before drying off the skin.
- Cleaning porcelain, such as your bathtub, sink or toilet, is the third use for a pumice stone. The harder the water is in your home, the more likely it is that rust will form in damp areas. According to BrightHub.com, you should put on rubber gloves, wet the pumice stone and rub it directly on the rust stains just as you would with chemical cleaners. The stone will not scratch the porcelain surface unless you rub too vigorously.
- Yet another use for a pumice stone is hair removal. This technique should mainly be used on leg hair, as other areas of the body have more sensitive skin. According to Hairremoval.in/friction, the stone should be rubbed very gently in a circular motion to remove leg hair. Your skin should be wet and soapy, and be sure to use a moisturizer (with no fragrance) afterward to prevent inflammation.
- Last, a pumice stone can be used in the building trades. In an article on Livestrong.com, the Mineral Information Institute reported that "most mined pumice is used to make lightweight concrete mix and concrete blocks. It is the lightweight quality of pumice stone that also makes landscapers want to use it in their designs." Another industrial use for the pumice stone is washing jeans. If you put a stone in the washing machine with jeans, the wear and tear from the stone will give them a "worn look."
