How to Rejuvenate a Lead Acid Battery

by BretN
itstillruns article image
batterie image by Ewe Degiampietro from Fotolia.com

A lead acid battery is, most commonly, a 12 volt battery with a series of six cells. Each cell contains a positive lead oxide plate and a negative lead plate and is filled with a solution of sulfuric acid. As the battery discharges, the positive plate reacts with the sulfuric acid and produces lead ions in the water. The lead ions combine with the sulfate ions in the sulfuric acid to form lead sulfate. As the lead sulfate coats the plates, the battery is less effective and will eventually fail. Treating the battery with an acid called EDTA will remove the sulfating and prevent future sulfating.

Step 1

Add a rounded teaspoon full of EDTA to each cell in your battery. This figure works for an average-sized battery, but it is not critical to get an exact amount.

Step 2

Agitate the battery frequently for the next couple of days and use the vehicle regularly. Do not charge the battery completely during this time.

Step 3

Charge the battery thoroughly after a couple of days. You should see increased performance from this point on, as the EDTA frees the plates of lead sulphate that has been coating the plates.

More Articles

article divider
×