A concrete driveway provides a solid surface on which you can drive your vehicles and park them without damaging the surrounding lawn or landscaping. If you are pouring a new driveway or replacing an old damaged one, some general guidelines will assist you in understanding the process and the nature of the project.
A do-it-yourself driveway requires excavation and the correct forms and tools. Removal of only the soil necessary for the depth of the concrete, usually a minimum of four inches plus two inches of sand, is imperative. Disruption of the deeper soil reduces compaction rates and the new driveway may settle and crack. Skim off only as much soil as needed.
A standard driveway is wide enough to allow a vehicle to enter and the driver to step out comfortably. A single driveway, leading to a one-car garage should be a minimum of 10 feet wide. The minimum standard for a two-car driveway is 18-feet wide. However, in some areas, custom driveways provide only two concrete strips, separated by soil in the middle, often planted with grass. Generally, adding a foot or two to the width of the driveway provides additional functionality.
Pour a do-it-yourself driveway in sections small enough for you and your helpers to successfully handle. After wet concrete is poured into the form, you have a limited amount of time before the concrete hardens and everyone must work quickly to spread and smooth the section before it cures. After one section dries, you may pour the next one. In hot dry weather, concrete dries rapidly.
Plan the grade of your driveway to slope away from any nearby structures. Direct water runoff away from a home or a garage by using a minimum slope of 1/4-inch per every four feet. For instance, if you are pouring a 10-foot wide driveway, one side will be at least 5/8-inches lower than the other side. In addition, call your local utility companies before removing soil. They will send a worker out to mark where their utilities run and notify you of the depth of the lines or pipes.
Pouring concrete is labor-intensive. Arrange for numerous workers, at least one of whom has experience in pouring concrete. Rent concrete tools from a construction rental store before you begin. You will need shovels or concrete rakes, a screed, a bull float and hand trowels. Power screeds and trowels reduce labor. Wear safety goggles, rubber boots and gloves to prevent wet concrete from coming into contact with bare skin.
- Photo Credit Image, courtesy of Stock.xchng
How Wide Should I Pave My Driveway?
Chances are, you don't give much thought to the width of a driveway until you encounter one that's too small, making you...
How to Pour Concrete for a Driveway
Your driveway serves not only as the entrance to your garage, it draws a visual line to your home, and is often...
Do It Yourself Concrete Driveway Coatings
Concrete is a frequently used material for driveways because it is durable and relatively inexpensive. The exposure of the concrete surface to...
How to Build Concrete Driveway Tracks
Concrete driveway tracks are a money saving alternative to a full concrete driveway. Driveway tracks also offer a place for water to...
How to Replace the Strips Between Concrete in a Driveway
If you've ever had the wooden trim divider located between the slabs of concrete in your driveway warp, buckle or come undone...
Do it Yourself Tar & Chip
Cost effective, yet attractive, driveway paving options are of interest to homeowners with driveways of all shapes and sizes. Fortunately, the tar...
Driveway Design Requirements
A driveway is a short pavement-like road connecting the entrance of a private home, building or garage to the street. It facilitates...