What is a Light-Dependent Resistor?


Light-sensing circuits are used in outdoor lighting, camera sensors and other applications where it is necessary to detect whether the environment is illuminated or dark. Light-dependent resistors, or photoresistors, are one method of changing the behavior of a circuit in response to light. Light-dependent resistors conduct electricity when exposed to light, but in the dark, their resistance increases so that current will not flow.

How Light-Dependent Resistors Work

  • Light-sensitive, semiconducting compounds, such as cadmium sulfide and lead selenide, normally act as low-conducting resistors. However, photons from light within a specific range of wavelengths interact with the electrons in these materials. Photons excite enough electrons in the materials that they no longer act as resistors but instead become conductive. To create a light-dependent resistor, light-sensitive semiconductors are deposited onto an insulator and covered in clear glass or plastic. Each end of the deposited semiconductor is connected to metal contacts so it can be placed in a circuit.

Types of Light-Dependent Resistors

  • Light-dependent resistors are either intrinsic or extrinsic. Intrinsic refers to the intrinsic light sensitivity of the material. No additional materials are added to intrinsic light-dependent resistors to modify their behavior or conductivity. Extrinsic refers to properties added to the resistor by adding impurities to the semiconducting material. Adding impurities can shift the wavelength of photons to which the light-dependent resistor is sensitive.

Resistor Wavelength Sensitivity

  • The wavelength of light that activates a light-dependent resistor varies with the semiconductor used to make the resistor. Light-dependent resistors made with cadmium sulfide, or CdS, are sensitive to the visible light spectrum. When the only light illuminating a CdS light-dependent resistor is outside of the visible spectrum, the CdS device retains its resistor behavior. It only becomes conductive in the presence of visible light. Many lead-based photoresistors, such as lead selenide, only become conductive in response to infrared wavelengths.

Building a Light-Sensitive Circuit

  • Simple light-activated circuits can be made by placing a light-dependent resistor in series with a load and a power source. When the resistor is illuminated, the resistor becomes a conductor, and the circuit will function. Dark-activated circuits are made by placing the electrical load in parallel with the light-dependent resistor. When illuminated, the light-dependent resistor will have less resistance than the load, so the electricity flows only through the resistor. When light is removed, the light-dependent resistor will have a resistance higher than the load, so electricity will now flow through the load instead.


  • Photo Credit isarescheewin/iStock/Getty Images
Promoted By Zergnet



You May Also Like

  • What Is a Resistor?

    Resistors are found in virtually every electronic device ever made. But what are these little oval components used for? How can they...

  • Differences Between Steel Pipe & Black Iron Pipe

    The average homeowner is unaware of how much piping leads into and out of their home. There are the ever-present pipes underneath...

  • Types of Resistors

    Different materials conduct electrical current with differing facility. For example, increasing the mix of carbon in a ceramic resistor reduces its resistance....

  • Uses of Photocells

    Photocells are semiconductors that are light detectors. They are essentially light dependent resistors, because they have an output that is proportional to...

  • What Does a Ballast Resistor Do?

    The process of starting a car involves more than simply turning the key to fire up your engine. Between the battery and...

  • Types of Light Sensors

    Light sensors help you everyday by detecting and reacting to different levels of light in appliances, switches and machines. Light sensors vary...

  • The Difference Between a Thermistor & a Thermocouple

    Thermistors and thermocouples are both measuring devices that can be used to measure temperature. However, they work based on different principles and...

  • Microprocessor Based Projects

    Made of silicon, microprocessors serve as the central processing unit in most computers, but they aren't limited to that function. Many projects...

  • Diet for Laryngopharyngeal Reflux

    Diet is an integral part in controlling acid reflux, especially when it's in the form of laryngopharyngeal reflux (LPR). When this condition...

Related Searches

Check It Out

How to Build and Grow a Salad Garden On Your Balcony

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!