Discover the expert in you.
Discover the expert in you.
The M1911 is a semi-automatic pistol popular with many firearms enthusiasts. When a round is fired, the recoil pushes the slide backward. The spent casing is drawn out of the barrel by the extractor. As the slide nears the rear of its travel, the case hits the ejector, pinned to the slide rails at the left rear of the frame, and is flung out and away from the pistol. Some shooters install an extended ejector that kicks the spent casing out of the gun more aggressively. These instructions assume the gun is field stripped, with the magazine removed and slide…
The M1911 is a semi-automatic handgun. It was developed in 1911, but is still used by police, military personnel and civilian shooters. Modern 1911s are available with upgraded sights that are more accurate and easier to aim than older models. Novak's was one of the first companies to offer upgraded sights for the 1911 pistol. Bullet impact points can vary due to differences in loads, bullet weights, wind and distance to target. Although both front and rear sights can be adjusted, in most instances, only the rear sight needs adjustment.
There are few pistols as recognizable as the Colt 1911 and its many variations. The pistol has existed, in some form or another, since 1911 when it became the standard-issue sidearm for the United States military. The 1911 is typically chambered for the big .45 ACP round, though different variations see it chambered in the .22 or .40 calibers as well. Of course, for a 1911 to have any use at all, learn how to properly load it with the correct ammunition.
Although the design is over 100 years old, the M1911 pistol is still preferred by experienced shooters and some military and police units. The M1911 was originally designed to feed and fire the .45 ACP ball ammunition, meaning the bullet is a round nosed, full metal jacket design. Some older M1911s occasionally have issues with feeding newer, modern hollowpoint defensive ammunition. Polishing the feed ramp in the frame, as well as a small section of the barrel, smooths the surface and aids in feeding all types of ammunition. These instructions assume the pistol is disassembled and barrel removed from the…
The M1911 semi-automatic handgun is most commonly chambered in the .45 ACP cartridge. The M1911 has a 100-year reputation as a reliable self defense, military and police pistol. The recoil pushes back the barrel during this action. The extractor -- located inside a groove in the slide -- pulls the spent casing out of the barrel. The extractor might eventually lose tension, and fail to pull the casing out of the barrel.
The M1911 pattern pistol was designed by John Moses Browning 100 years ago. It is still the preferred combat and self protection handgun of many experienced shooters. The gun fires the powerful .45 ACP cartridge which is very effective, but practicing with it can be very expensive. Marvel Precision is a company that produces a slide, barrel and magazine conversion kit to fit on an M1911 frame and enables the use of cheap .22 Long Rifle ammunition. Since .22LR is very cheap, especially when purchased in bulk, it is a great option to train with M1911 but at a much…
Bump firing simulates firing a fully-automatic weapon with a semi-automatic firearm. As of May 2011, it's the only legal way to fire a weapon in a near fully-automatic mode without a federal firearms license. Bump firing can be done to most semi-automatic rifles; you use the recoil of the firearm and a loose grip on the trigger. It's a learned skill and it's best to practice, but the process is simple. You can bump fire from either your hip or shoulder.
The Kimber Ultra Carry II is a miniature version of the venerable Colt M1911 handgun. The small handgun is designed as a backup or concealed-carry weapon rather than as a main sidearm. It is small enough to be easily concealed in a pocket or handbag. The Ultra Carry is available chambered for either the .45 ACP round, or the smaller 9mm Parabellum round. As with any pistol, it is vital you know how to disassemble your Ultra Carry in order to carry out routine maintenance and cleaning.
If ever there was a handgun that looked like it came straight out of a science fiction movie, the Hammerli 208 is it. The pistol is a riot of hard corners and straight lines mounted onto a thick faux-wood handle and is designed to be used almost exclusively in target-shooting competitions. As with all firearms, you will need to know how to disassemble the Hammerli 208 in order to perform routine maintenance and repairs.
The Kimber Pro series of pistols are handguns of various sizes designed to look and feel similar to the venerable Colt Model 1911. While the "Pro" line actually consists of several different models of handgun, each model is field-stripped in the exact same way. As with all pistols, it is important that you know how to take apart your Kimber Pro in order to perform routine cleaning and maintenance. This process is different from the Model 1911 field stripping process, despite the similarity in appearance.
Field stripping a pistol is an important skill for a gun owner. It allows you to become more intimate with your gun, and it helps bring a better understanding of how it works. It's also necessary for performing routine maintenance and cleaning after you've been shooting. For owners of a Colt Mustang .380, the field stripping method is similar to other hand guns, and it's a relatively easy process.
The Colt M1911 is a semi-automatic handgun that has existed for almost a century. The pistol has inspired dozens of knock-offs and similar designs in other companies; the Charles Daly 1911 model is one such design. The pistol is manufactured by Armscor -- a Phillipines-based company -- and features the 'Bull Barrel' design rather than the more common "bushing and barrel" design of other 1911s. Break down your Daly 1911 in order to properly clean and maintain the weapon.
The Colt 1911 Airsoft gun is a non-lethal duplicate of a classic weapon: a spring instead of gunpowder provides the force for firing a projectile through the barrel to the target. The spring can become loose over time, causing the pellets that are being fired to have less FPS (feet per second) force. To fix the Colt 1911 airsoft's spring, partially disassemble the handgun first. The procedure is straightforward, since the replica weapon is designed for disassembly so it can be cleaned. A few common tools are all that is needed.
The Colt 1911 has been around since the first decade of the 20th century, when it was commissioned as the official sidearm of the U.S. military. Most 1911 models secure the gun barrel and recoil spring assembly in place through the use of a bushing--a small teardrop-shaped metal plate on the face of the pistol--but occasionally you will find one that uses a cone or "bull" barrel instead. Field-stripping a 1911 with a cone/bull barrel is a significantly different process from field-stripping a common 1911 because of the way the bull barrel is installed.
The Argentine-made FM Hi Power 9mm Detective is a shorter barrel and slide version of the popular Browning Hi Power. Most FM Hi Powers have the earlier MK I barrel design with a curved feed ramp, and hollowpoint bullets may have feeding problems. The feed ramp can be re-contoured and polished to help load hollowpoint ammunition up the ramp and into the chamber.
The Colt M1911 served as the standard issue firearm of the U.S. Army from March 13, 1911, until Jan. 14, 1985. The model that went into service in 1911 remained unchanged for 13 years until 1924 when the gun underwent minor changes. The modifications were considered improvements, however minor, and the modified version of the Colt was designated the Colt M1911A1. Being able to identify an original model Colt M1911 therefore comes down to being able to differentiate it from a Model 1911A1.
The most notable automatic handgun made by Colt is the Model 1911. These automatics began their use when the U.S. Army took possession of the first production runs in 1912. The 1911 model automatics remained essentially unchanged until 1991 when Colt Firearms introduced the model 1991. The company's desire was to introduce an economy version of the 1911 at a reasonable price. The two automatics were essentially the same gun with a few changes.
The venerable old Colt M1911 handgun is one of the most recognizable pistols in the world, having been the primary sidearm of the U.S. military from before the First World War until it was replaced by the Beretta 92 in the early 1980s. One of the advantages to this particular weapon is the ease of which it can be taken apart for repair and maintenance. This is handy, because to replace the barrel on an M1911, you will end up having to take the whole weapon apart.
The Colt Mustang is a pistol that takes .380 caliber bullet. Similar to a Colt .45, which was made for government agencies, the Mustang is sold to private buyers. Considered a single action, semi-automatic gun it will not shoot multiple bullets without resetting.
The Colt Concealed Carry Officer (CCO) is a model 1911 pistol designed specifically for concealed carry. Colt no longer produces the CCO pistol. However, you can still find the CCO through used gun stores, online auctions or private sales. The pistol is essentially the combination of two models of Colt pistols: the Colt Officer's model and the Colt Commander. The Colt CCO pistol is chambered to use .45 ACP ammunition.
The Colt Model 1911 semi-automatic pistol is the most popular semi-automatic pistol in U.S. military history. The M1911 family of .45-caliber pistols, invented by John M.Browning and placed into service in 1911, was the U.S. armed forces standard-issue sidearm until 1985, when it was replaced by the 9mm Beretta M9 pistol. In total, about 2.7 million M1911 and M1911A1 pistols were produced. The Colt Series 70 guns were introduced in 1971, which was the first design change since 1926. The Colt Series 80 pistols debuted in 1983.
The Colt series 70 pistols were the models of 1911 handguns Colt produced by in the 1970s. The series 70 pistols were replaced with the series 80 models in the early 1980s, the only difference being an internal safety bar installed in the new models. Series 70 pistols are accurate, reliable and still see widespread use. The teardown procedures for the pistols are identical for all 1911 handguns.
The Colt Mustang is a compact pistol chambered in the .380 caliber, which is based on the design of the larger Colt .45 1911 government-model pistol. Like the Colt .45, the Colt Mustang is a single action--requiring the hammer to be cocked back--magazine-fed semiautomatic pistol. The Colt Mustang can be used as a backup pistol for shooters who are partial to using the larger .45-caliber pistols.
The Colt 1911 .45 pistol was the standard issue for U.S. military personnel until it was replaced by the 9-mm Beretta in the 1980s. This pistol is still manufactured and used today, and very little has changed about its mechanical operation. Occasionally the Colt 1911 will need maintenance and possibly the replacement of a part such as the barrel link pin. To replace the barrel link pin you'll need to know how to field-strip the weapon.
Colt has been manufacturing handguns for over a century, and the 1911-model pistol was actually a standard military-issue side arm in the U.S. Army for many years in the 1900s. Any military person can appreciate the upkeep handguns such as this require. It is always good to periodically disassemble your Colt 1911 in order to clean and oil it. These guns are made up of many moving parts, so disassembly can take up a chunk of time if you've never done it before.
John Moses Browning's 1911 pistol design and especially its later update the 1911A1, also commonly known as the Colt 1911, has been modified in just about every way imaginable over the years. What has gradually emerged are a few standard modifications that have proven to be beneficial to the average shooter, and the ejection port lower, bevel and flare job is one of the most visible of these common mods. Originally intended to aid the hand loader by minimizing damage to the brass cases and placing those cases within a small area for easy retrieval, the port flare also theoretically…
Bump-firing is a method of firing a semiautomatic weapon very rapidly, exactly mimicking fully automatic fire. The Colt M1911 semiautomatic pistol is a classic firearm, used as the standard-issue sidearm by the U.S. armed forces from 1911 through 1985. The Colt M1911 semiautomatic pistol can be bump-fired using an improvised tool, but it takes a bit of preparation and practice to perform it well---and to do it safely.
Building your own model 1911 pistol is simply a matter of procuring all the parts and putting them together. The advantage of a 1911 pistol is that all the parts are standardized regardless of manufacturer. The only part of the pistol that is regulated is the lower receiver. The government considers this component a firearm and is subject to local and federal laws. All of the other components are unregulated and can be purchased without restriction.
The Colt 1911 is known throughout the world for simplicity, accuracy, power and reliability. Although one of the most reliable pistols ever devised, the older design was created in 1911 and there are a few problems that may arise. Even ompared to modern firearms the 1911 is still considered reliable, but some ejector problems can cause jamming in this pistol if not remedied.
The Colt model 1911 is among the most recognizable handguns in the world. Designed in the early 1900s as a universal side-arm for the various branches of the United States armed forces, the 1911 has been in steady production ever since its inception. One of the most touted features of the popular handgun is the inherent simplicity in its design; the 1911 is able to be broken down and reassembled without using a single tool outside of your hands.
Building your own Colt Government model pistol simply requires you to gather the necessary parts and assemble them correctly. The Colt 1911 pistol was the primary handgun of the U.S. military for most of the 20th century and is popular with shooters worldwide. The advantage of the 1911 is that all the parts are standardized and therefore interchangeable regardless of manufacturer; however, if you want a true Colt pistol, use only Colt parts. The lower receiver is considered a "firearm" by the Bureau of Alcohol, Tobacco and Firearms and Explosives (ATF) and is sold as the gun. The rest of…
The Colt Model 1911 is one of the most recognized and iconic pieces of American firearms history. The first pistol came off the line in 1911, and the 1911 became the primary sidearm for all branches of the United States Military, until it was replaced in 1985 by the Beretta 92FS. One of the primary selling points of the Colt M1911 was the inherent simplicity of its design--the entire pistol is able to be field-stripped for cleaning using nothing more than one's hands. This comes in handy when a part--like a recoil spring, for instance--needs to be replaced. Installing a…
An extractor is the metal slide on the top of the frame that you pull back to chamber a bullet. A 1911 pistol is a .45 APC caliber gun. This gun is simple to disassemble and work on, but is relatively expensive to customize because of the high demand for this model. Any 1911 owner will be able to complete this project in less the five minutes as long as they are familiar with the gun.
While most Colt 1911 owners will cite the weapon's reliability and accuracy (or perhaps the simple iconic nature of the gun itself) as the reason for owning one, one of the nicest things about owning a Colt 1911 is its ease to maintain and repair. The 1911 is designed to be disassembled quickly and easily, without the need for any tools other than your hand. Replacing the recoil spring on a Colt 1911--with a recoil spring purchased from Wolff, specifically--is also relatively simple, once you know what you are doing.
The Colt 1911 handgun began production in May of 1912, and was intended to be the primary sidearm for the United States military. Since then, the venerable 1911 has become one of the most widely recognized and used pistols in the world, and has gained an excellent reputation thanks to its sturdy and reliable design. If you own a Colt 1911, it is important that you lubricate the weapon's moving parts every so often--typically before shooting--so as to keep it functioning smoothly. Fortunately, it is neither terribly complicated nor especially time-consuming to lubricate the 1911.
The original Colt 1911 handguns were designed to be the standard-issue sidearm for the U.S. Military and quickly becoming popular outside of military service as well. Today, the 1911 stands as one of the most popular and widely-recognized handguns in existence, and still sees active use both in the military and civilian sectors. Any gun owner will be able to tell you that you will need to clean your weapon periodically to make sure it stays safe to own and operate; the best way to clean a Colt 1911 is to field-strip the weapon and clean the individual parts. Fortunately,…
The grip safety on a pistol is the piece that juts out below the trigger hammer and protects your hand from being struck by it. The Colt 1911 went through a variety of style changes to the grip safety used on the m1911 model, from the long, downward-curving beaver tail to the upturned duck tail and the standard GI grip safety, which is little more than a bump. Many owners want to change the grip safety on a Colt 1911 pistol to the GI style for appearances and shooting comfort. You can modify the grip safety at home with a…
The Colt M1911 was designed by Joseph Browning and produced by Colt for the U.S. Armed Forces in 1911. It was used by the U.S. military until it was replaced in 1985 by the M9 Beretta 92F. Colt based a number of different designs on the M1911 model improving the design for ease of use and different caliber bullets. M1911 and M1911A1 are the two basic models with the M1911 designation. There are slight differences between the two that can be recognized if you know what to look for.
Want to know how to dissasemble a Colt 1911 or 1991 Pistol? Here you go.
